Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 
 Reply to this topicStart new topic
> Installed 911 Aluminum Auxiliary Support (Front Cross Member), Now Protective Plate Doesn't Fit. Solutions?
mwyatt
post Dec 14 2010, 01:33 AM
Post #1


Member
**

Group: Members
Posts: 84
Joined: 5-April 03
From: San Diego, CA
Member No.: 516
Region Association: Southern California
Hi guys. I installed an Aluminum Auxiliary Support in my 914 this weekend. It bolts right up, but it comes down lower than the steel piece and now the stock 914 underfloor protective plate doesn't fit. There are also no holes in the support for the plate to screw into in the front, but the two bolts in the rear are fine (see attached pic from the front).

I know I can't be the only one that has done this. What have others done to make the protective plate work?

By the way, for those that have been thinking about doing this, I probably wouldn't recommend it. I'd guess it's only 3 or 4 pounds lighter than the steel piece, and some have suggested that it can flex. But I'm committed at this point to trying to make it work.

- MikeAttached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
r_towle
post Dec 14 2010, 10:08 AM
Post #2


Custom Member
***************

Group: Members
Posts: 24,574
Joined: 9-January 03
From: Taxachusetts
Member No.: 124
Region Association: North East States
drill two small screw holes in the flange of the support bar and fasten it that way.

Its made for a 911, so the stock 914 holes would never have been cast.

Rich
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mwyatt
post Dec 14 2010, 11:59 AM
Post #3


Member
**

Group: Members
Posts: 84
Joined: 5-April 03
From: San Diego, CA
Member No.: 516
Region Association: Southern California
Thanks Rich, makes sense. And I suppose I could also make a gasket and attach it to the two original front holes in the protective plate to keep the seal it off.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Cap'n Krusty
post Dec 14 2010, 12:02 PM
Post #4


Cap'n Krusty
**********

Group: Members
Posts: 10,794
Joined: 24-June 04
From: Santa Maria, CA
Member No.: 2,246
Region Association: Central California
Have you looked into fitting the 911 plate?

The Cap'n
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mwyatt
post Dec 14 2010, 12:16 PM
Post #5


Member
**

Group: Members
Posts: 84
Joined: 5-April 03
From: San Diego, CA
Member No.: 516
Region Association: Southern California
QUOTE(Cap'n Krusty @ Dec 14 2010, 02:02 PM) *

Have you looked into fitting the 911 plate?

The Cap'n



I have not. Does anyone know if it will fit?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
pete000
post Dec 14 2010, 01:09 PM
Post #6


Senior Member
***

Group: Members
Posts: 1,885
Joined: 23-August 10
From: Bradenton Florida
Member No.: 12,094
Region Association: South East States
4 lbs is 4 lbs !

I have to diet for a month and go to the gym twice a day to loose 4 lbs !

Was the job easy, I want to do this on my 914 soon.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Cap'n Krusty
post Dec 14 2010, 01:35 PM
Post #7


Cap'n Krusty
**********

Group: Members
Posts: 10,794
Joined: 24-June 04
From: Santa Maria, CA
Member No.: 2,246
Region Association: Central California
QUOTE(mwyatt @ Dec 14 2010, 10:16 AM) *

QUOTE(Cap'n Krusty @ Dec 14 2010, 02:02 PM) *

Have you looked into fitting the 911 plate?

The Cap'n



I have not. Does anyone know if it will fit?


It fits the car from which the parts were sourced. I'm guessing it'll fir your car, too.

The Cap'n
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mwyatt
post Dec 14 2010, 03:58 PM
Post #8


Member
**

Group: Members
Posts: 84
Joined: 5-April 03
From: San Diego, CA
Member No.: 516
Region Association: Southern California
QUOTE(pete000 @ Dec 14 2010, 03:09 PM) *

4 lbs is 4 lbs !

I have to diet for a month and go to the gym twice a day to loose 4 lbs !

Was the job easy, I want to do this on my 914 soon.



Pete, the job is fairly easy. Make sure you measure your front ride height on each side of the car before you take everything apart, because you'll have to reset it.

Cap'n, I'll see if I can pick up a Carrera protective plate and let everyone know if it works.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mwyatt
post Jan 10 2011, 11:43 PM
Post #9


Member
**

Group: Members
Posts: 84
Joined: 5-April 03
From: San Diego, CA
Member No.: 516
Region Association: Southern California
I picked up a protective plate from a '77 911 and it fit really well. I got it from Parts Heaven. Didn't come with gaskets, so I made some and it works fine. For those that want to do this, for the entire project you need three items-
Aluminum Crossmember
Tabs (2 of them, they bolt to the cross member and on 911s mount the underbody swaybar)
911 Protective Plate
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
jt914-6
post Jan 11 2011, 05:22 AM
Post #10


Driving & working on teeners 41 years
***

Group: Members
Posts: 1,785
Joined: 3-May 08
From: Bryant, Arkansas
Member No.: 9,003
Region Association: South East States
(IMG:style_emoticons/default/thisthreadisworthlesswithoutpics.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
URY914
post Jan 11 2011, 07:50 AM
Post #11


I built the lightest 914 in the history of mankind.
****************************************************************************************************

Group: Members
Posts: 120,446
Joined: 3-February 03
From: Jacksonville, FL
Member No.: 222
Region Association: None
This really isn't worth the effort. Removing 4 pounds at the lowest part of you car actually raises your center of gravity of the car. I have the lightest car ever and I won't be doing this to my car.
User is online!Profile CardPM
Go to the top of the page
+Quote Post
Cap'n Krusty
post Jan 11 2011, 09:47 AM
Post #12


Cap'n Krusty
**********

Group: Members
Posts: 10,794
Joined: 24-June 04
From: Santa Maria, CA
Member No.: 2,246
Region Association: Central California
QUOTE(mwyatt @ Jan 10 2011, 09:43 PM) *

I picked up a protective plate from a '77 911 and it fit really well. I got it from Parts Heaven. Didn't come with gaskets, so I made some and it works fine. For those that want to do this, for the entire project you need three items-
Aluminum Crossmember
Tabs (2 of them, they bolt to the cross member and on 911s mount the underbody swaybar)
911 Protective Plate


It didn't come with gaskets because it doesn't use gaskets.

The Cap'n
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Britain Smith
post Jan 11 2011, 09:20 PM
Post #13


Nano Member
****

Group: Members
Posts: 2,354
Joined: 27-February 03
From: Hillsboro, OR
Member No.: 364
You know that the aluminum crossbar flexes...ask SirAndy.

-Britain
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Chris Hamilton
post Jan 11 2011, 10:35 PM
Post #14


Senior Member
***

Group: Members
Posts: 611
Joined: 7-March 06
From: Berkeley, CA
Member No.: 5,687
QUOTE(URY914 @ Jan 11 2011, 05:50 AM) *

This really isn't worth the effort. Removing 4 pounds at the lowest part of you car actually raises your center of gravity of the car. I have the lightest car ever and I won't be doing this to my car.



So are you going to add a 4lbs weight to your steel crossbar and make your center of gravity even better? (IMG:style_emoticons/default/happy11.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Richard Casto
post Jan 12 2011, 10:03 AM
Post #15


Blue Sky Motorsports, LLC
***

Group: Members
Posts: 1,465
Joined: 2-August 05
From: Durham, NC
Member No.: 4,523
Region Association: South East States
QUOTE(Chris Hamilton @ Jan 11 2011, 11:35 PM) *

QUOTE(URY914 @ Jan 11 2011, 05:50 AM) *

This really isn't worth the effort. Removing 4 pounds at the lowest part of you car actually raises your center of gravity of the car. I have the lightest car ever and I won't be doing this to my car.



So are you going to add a 4lbs weight to your steel crossbar and make your center of gravity even better? (IMG:style_emoticons/default/happy11.gif)

Zing! Good one! (IMG:style_emoticons/default/smile.gif)

Clearly you want to lower both weight and CG, but if you had to pick one over the other, I would say the priority is to first lower weight and then second lower CG. And when done, if you end up removing more weight below the CG than above (which would move the new CG up), so be it. When you have to deal with a minimum weight requirement, and you are able to build the car to below minimum, then you can work to get the CG as low as possible by putting ballast as low as possible.

Now the real world benefits of the aluminum cross bar is another story. But, I have one and plan to put it on my car.

Richard
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 7th May 2024 - 07:31 PM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...