 What's The Best Way to Bend Brake Tubes?, Without the bending tool. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 7TPorsh |
 Jan 26 2011, 12:39 PM
Post
#1
|
|
7T Porsh  Group: Members Posts: 2,691 Joined: 27-March 06 From: Glendale Ca Member No.: 5,782 Region Association: Southern California 
 |
I didn't want to spend $30 plus for a front caliper line so I bot a straight line with fittings at autozone for $5 and want to bend it myself. I don;t want to buy a tool since I really won't have a lot of use for it after this.
It's the S shaped line in the early brakes. Two opposite 90 degree bends. |
   |
 
|
Posts in this topic
7TPorsh What's The Best Way to Bend Brake Tubes? Jan 26 2011, 12:39 PM
jim912928 autozone, advanced auto etc has these cheap bendin... Jan 26 2011, 12:50 PM
7TPorsh
autozone, advanced auto etc has these cheap bendi... Jan 26 2011, 01:21 PM 9146986 They are easy to kink if you have to make a sharp ... Jan 26 2011, 01:26 PM underthetire http://www.harborfreight.com/catalogsearch...q=tub... Jan 26 2011, 03:20 PM detoxcowboy quote name='underthetire' date='Jan 26... Jan 26 2011, 09:19 PM KELTY360 How many straight lines do you have to kink becaus... Jan 26 2011, 03:26 PM Andyrew ^^^^this tool..
You can easily kink that line. Sh... Jan 26 2011, 03:26 PM Vacca Rabite :agree: and :agree:
Buy the tool. You WILL need i... Jan 26 2011, 03:41 PM jcd914 The smart thing is to buy the tool but ...
Becaus... Jan 26 2011, 03:46 PM 7TPorsh good enough, off to china freight. Never had the n... Jan 26 2011, 03:53 PM 76-914 Before the internet and Harbor Freight we didn... Jan 26 2011, 07:35 PM gothspeed Buy the tool, it is kinda fun to use :) ............. Jan 26 2011, 09:43 PM Jakeodoule I have good success with a small old school door s... Jan 26 2011, 10:31 PM rohar
I have good success with a small old school door ... Jan 27 2011, 11:14 AM scotty b I guess I am in the minority. I havea a cheapo ben... Jan 26 2011, 10:34 PM strawman I know that you've already bought the pre-flar... Jan 26 2011, 11:40 PM McMark I'd have paid the $30 and spent more time... Jan 27 2011, 10:58 AM 7TPorsh I agree i probably should has just bot the $3... Jan 27 2011, 11:04 AM tornik550 This is the best way without a bending tool. Jan 27 2011, 11:26 AM rnellums I was able to borrow one from my FLAPS, put a ... Jan 27 2011, 11:56 AM two-strokejohn View the products at this web site... they sell th... Jan 27 2011, 12:20 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 01:08 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.