 fuel problems |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 70-914nut |
 Apr 12 2011, 07:43 PM
Post
#1
|
|
Member  Group: Members Posts: 119 Joined: 15-March 11 From: Elizabeth city nc Member No.: 12,826 Region Association: None  |
Need help with fule injection for 1.7 1970. cant get the fuel to the engine. tried putting fuel in every line. checked fuel flow to the pump. seems to have a little air past the filter (new) pump is sluggish after rebuilding and cleaning the varnish out. i would think yhay the pump would pull fuel to the bay right? with the engine turning over but not starting the pump runs. i do have some vacuum lines gone but the big main one is there and the distributer line as well. please help. im ordering a new pump because i just dont think it is operating as it should. thanks
|
   |
 
|
Posts in this topic
70-914nut fuel problems Apr 12 2011, 07:43 PM
RFoulds The fuel comes from pump to pressure regulator. i... Apr 12 2011, 07:56 PM
poorsche914 Have you pulled the injectors and tested to see if... Apr 12 2011, 08:57 PM 70-914nut pump isnt pumping sufficiently at all. Apr 13 2011, 09:54 AM pt_700 after replacing my fuel pump, i'm at similar l... Apr 13 2011, 10:16 AM Dave_Darling The two most likely problems are that the hoses ar... Apr 13 2011, 04:47 PM 70-914nut auto atlanta rebuilt mine. just installed it but c... May 7 2011, 03:37 PM 914 shifter
auto atlanta rebuilt mine. just installed it but ... May 7 2011, 04:42 PM Dave_Darling The regulator goes on the return line, not the pre... May 7 2011, 04:44 PM 70-914nut getting fuel to the injectors but not out of them.... May 8 2011, 08:21 AM sfrenck
getting fuel to the injectors but not out of them... May 8 2011, 08:38 AM 70-914nut if the wiring is not correct, which i am searching... May 8 2011, 09:00 AM 70-914nut injectors stuck. trying to free them. May 8 2011, 10:23 AM sfrenck
injectors stuck. trying to free them.
Don... May 8 2011, 10:39 AM 70-914nut Thanks scott going to buy new ones monday. 48.00 a... May 8 2011, 11:45 AM Spoke Do you know if your FI is energizing the injectors... May 8 2011, 01:13 PM 70-914nut GO STEELERS Im not even sure my pressure regulato... May 8 2011, 02:07 PM 70-914nut does anyone have a pic of the 1.7 pressure regulat... May 8 2011, 02:35 PM swl
does anyone have a pic of the 1.7 pressure regula... May 8 2011, 03:11 PM Spoke Here's my engine before installation.
In the ... May 8 2011, 02:59 PM 70-914nut ok let me see supply, druck and return. the line f... May 8 2011, 04:19 PM 70-914nut great lopking engine jerry thanks. now i need to m... May 8 2011, 04:30 PM sfrenck You need to take a step back, put the tools down, ... May 8 2011, 05:53 PM 70-914nut have stopped for a while to gather all the info yo... May 8 2011, 07:07 PM 70-914nut oh by the way, po bypassed the cold air valve and ... May 8 2011, 07:10 PM swl
oh by the way, po bypassed the cold air valve and... May 9 2011, 08:12 PM slu234 I have a `70 1.7L as well that had been sittin... May 9 2011, 11:49 AM slu234 Also, you may want to check out this from Jeff Bo... May 9 2011, 12:01 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 07:47 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.