 Wheel stud dimensions - machinig question, Eric shea? Brad? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Aaron Cox |
 May 18 2004, 07:11 PM
Post
#1
|
|
Professional Lawn Dart  Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California  |
hey guys, what is the final hole size that is needed to be drilled for the press in wheel studs in the hub? also, what is the size of the most rear part of the stud (the size i need to spotface)
thanks guys! |
   |
 
|
Posts in this topic
Aaron Cox Wheel stud dimensions - machinig question May 18 2004, 07:11 PM
Aaron Cox also, anyone know the thickness of the hub off han... May 18 2004, 07:17 PM Matt Romanowski I actually need this info too. Does anybody have a... May 18 2004, 09:51 PM Eric_Shea The thickness of the hub varies. The surface by t... May 19 2004, 07:35 AM brant I would add:
Measure the studs you are going to u... May 19 2004, 08:21 AM Eric_Shea I agree with Brant. Best to measure what you have... May 19 2004, 10:18 AM Aaron Cox sweet! thanks guys. i dont currently have stud... May 19 2004, 03:08 PM Aaron Cox also, is it okay to use 50mm studs instead of 45mm... May 19 2004, 03:11 PM Eric_Shea Depends on what they mean by 50mm. Tip to tip? T... May 19 2004, 03:14 PM Aaron Cox pelican lists 45mm as unavailable, so i assume tha... May 19 2004, 03:16 PM Aaron Cox shoot, one more question eric,
what do i do about ... May 19 2004, 03:17 PM MattR If anyone wants this mastercam program when Im don... May 19 2004, 03:20 PM Eric_Shea yes... but double check that size. I was just rea... May 19 2004, 03:21 PM Aaron Cox Eric thanks! youve helped me out a lot! May 19 2004, 03:27 PM Mueller Hey Eric, so have you pressed in the Verbus studs ... May 27 2004, 10:50 AM Eric_Shea They're in. 14mm is the magic number. The st... May 27 2004, 12:33 PM Mueller thanks for the info :) May 27 2004, 01:05 PM Aaron Cox update: still working on it. got studs....got hubs... May 27 2004, 04:46 PM Eric_Shea :ttiwwp:
:D May 29 2004, 02:55 PM
Aaron Cox arg...metal shop foreman is being a prick! i t... May 29 2004, 05:26 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 24th May 2024 - 08:04 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.