 I need a radiator for my SBC conversion, Ideas? Part numbers? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| pete |
 Jun 21 2011, 10:52 AM
Post
#1
|
|
Member  Group: Members Posts: 158 Joined: 23-August 10 From: New Jersey Member No.: 12,092 Region Association: North East States  |
I need to purchase a radiator for my SBC conversion and am in need of some suggestions/part numbers. JEGS? Also, will need a over flow canister and hoses.
|
   |
 
|
Posts in this topic
pete I need a radiator for my SBC conversion Jun 21 2011, 10:52 AM
Andyrew Budget?
You could build a radiator system from ... Jun 21 2011, 11:02 AM
pete
Budget?
You could build a radiator system from ... Jun 21 2011, 12:46 PM messix from s10 v8 conversions they're using a stock ... Jun 21 2011, 12:52 PM andys The only real semi-bolt-in system that I know of i... Jun 21 2011, 01:13 PM BIGKAT_83 My favorite C&R Radiator comes in a 14x27.5... Jun 21 2011, 01:53 PM joefri187
I need to purchase a radiator for my SBC conversi... Jun 21 2011, 02:00 PM pete
[quote name='pete' post='1497484' date='Jun 21 20... Jun 21 2011, 02:20 PM Andyrew Joe,
Thats a nice looking setup!
Nice shee... Jun 21 2011, 02:10 PM Andyrew Bob,
Pick and pull in my area would charge ... Jun 21 2011, 02:15 PM BIGKAT_83
Bob,
Pick and pull in my area would charge ... Jun 21 2011, 04:19 PM Andyrew
Bob,
Pick and pull in my area would charge ... Jun 21 2011, 11:01 PM joefri187 Here are a couple more pics...
The radiator is fl... Jun 21 2011, 02:55 PM pete
Here are a couple more pics...
The radiator is f... Jun 22 2011, 01:18 PM matthepcat Fluidyne built one custom to my specs using the Pa... Jun 21 2011, 03:25 PM BRAVE_HELIOS In my setup I went with a Giffin radiator, model 1... Jun 21 2011, 05:52 PM pete
In my setup I went with a Giffin radiator, model ... Jun 22 2011, 01:02 PM BRAVE_HELIOS In my setup I went with a Giffin radiator, model 1... Jun 23 2011, 05:36 PM BRAVE_HELIOS Hey all,
I've had my setup in place for a whi... Sep 10 2014, 02:41 PM jcd914 It's all relative.
When I needed a pair of fa... Jun 22 2011, 10:41 AM Andyrew Pete,
You wire them yourself, Typically on a swi... Jun 22 2011, 01:25 PM joefri187 Andrew nailed it....
I used a Derale adjustable f... Jun 22 2011, 02:05 PM andys
Andrew nailed it....
I used a Derale adjustable ... Jun 22 2011, 02:16 PM Andyrew Good thing about those copper tubes is you can eas... Jun 22 2011, 02:48 PM joefri187
Good thing about those copper tubes is you can ea... Jun 22 2011, 04:10 PM drive-ability Griffin double pass 9D-10682-01 Jun 22 2011, 10:11 PM pete
Griffin double pass 9D-10682-01
Hi, I tried fin... Jun 23 2011, 08:57 AM drive-ability
Griffin double pass 9D-10682-01
Hi, I tried fi... Jun 23 2011, 09:05 PM pete
Griffin double pass 9D-10682-01
That's an a... Jun 23 2011, 09:56 AM andys I used the AFCO 80133N which is available from Sum... Jun 23 2011, 10:00 AM ChristopherB Does this thread, and these different set ups appl... Mar 15 2013, 08:08 AM bulitt If you purchase a short enough radiator you can in... Mar 15 2013, 08:23 AM boxstr It seems that the radiator has always been the Ach... Mar 15 2013, 09:24 AM pete I can't believe I still haven't procured t... Mar 15 2013, 09:30 AM slothness Don't skimp on cooling, re-read your old threa... Mar 15 2013, 09:52 AM ChristopherB Does the set up differ depending on the engine use... Mar 15 2013, 02:49 PM kg6dxn As a rule of thumb: You should use a radiator with... Mar 15 2013, 05:12 PM 76-914 I would think it's too small plus square tubin... Sep 10 2014, 04:00 PM BRAVE_HELIOS Did some research this evening. Found that mountin... Sep 10 2014, 08:01 PM Chris H. Yeah that square tubing size sounds very small for... Sep 10 2014, 08:37 PM Mike Bellis Temp sensor should be on the engine to know how ho... Sep 10 2014, 10:13 PM speed metal army Don't forget flow! The rad needs to be big... Sep 10 2014, 10:30 PM Mike Bellis
Don't forget flow! The rad needs to be bi... Sep 10 2014, 11:20 PM CptTripps I used an aluminium double-pass VW Scirocco radiat... Sep 11 2014, 09:51 AM mikesmith Not certain about Mike's setup, but I have the... Sep 12 2014, 02:25 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 12th May 2024 - 08:41 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.