 My motor is headed back to Series9, Its going to kick its smoking habit |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| MoveQik |
 Jun 23 2011, 05:07 PM
Post
#1
|
|
What size wheels can I fit?  Group: Members Posts: 4,645 Joined: 5-April 05 From: Scottsdale, AZ Member No.: 3,881 Region Association: Southwest Region   |
I have this on Narp but I know most of you don't check in there too often. I thought I would put it here as well so all can see what Joe is up to.
Buying a used motor is always a roll of the dice. Mine has ran strong since Joe put it in but the smoking issue(valve guides seem to be the most common diagnosis) has become worse over time and the oil leaks are no longer small. (IMG:style_emoticons/default/mad.gif) So we struck a deal that has me pulling the motor and sending it to Joe to rebuild. Then he is coming out to help me put it back in(read as, he is letting me slow him down). There are added costs in doing this obviously but Joe made it more than fair and it worked out to be cheaper than having any of our local shops do the work and hand me back a freshened up motor. Plus, I get some more much needed hands on experience. I got the motor out yesterday. I will be pulling off parts that I want to pretty up while Joe has the motor. I am also going to take this time to clean up and respray the engine bay. The before photo, fresh out of the car: Attached thumbnail(s) 
|
   |
 
|
Posts in this topic
MoveQik My motor is headed back to Series9 Jun 23 2011, 05:07 PM
URY914 Hey is that a jackstand in the corner? :confused:... Jun 23 2011, 07:01 PM Series9 So what are we doing?
3.4?
Individual throttle bo... Jun 23 2011, 07:14 PM
MoveQik
So what are we doing?
3.4?
Individual throttle b... Jun 23 2011, 07:20 PM Series9
Hang on, let me put my wife on the phone for thi... Jun 23 2011, 07:35 PM Series9 http://www.youtube.com/watch?v=FT-f9ov5ypQ
B:) Jun 23 2011, 07:57 PM r_towle
http://www.youtube.com/watch?v=FT-f9ov5ypQ
B:)
... Jun 24 2011, 07:34 AM Series9
[quote name='Series9' post='1499085' date='Jun 23... Jun 24 2011, 09:15 AM r_towle
[quote name='Series9' post='1499085' date='Jun 2... Jun 24 2011, 11:03 AM r_towle what is that injection setup?
Also, what is the ig... Jun 23 2011, 09:38 PM MoveQik It's all stock. As for HP, the specs say the ... Jun 23 2011, 09:44 PM Elliot Cannon Joe doesn't actually let you touch anything do... Jun 23 2011, 11:47 PM MoveQik
Joe doesn't actually let you touch anything d... Jun 24 2011, 12:00 AM Series9
Joe doesn't actually let you touch anything d... Jun 24 2011, 05:51 AM Series9 So I have a late night (read: alcohol induced) em... Jun 24 2011, 05:58 AM MoveQik
So I have a late night (read: alcohol induced) e... Jun 24 2011, 07:43 AM Madswede
So I have a late night (read: alcohol induced) ... Jun 24 2011, 05:26 PM ellisor3 Joe's garage rules are pretty simple:
1.) Lea... Jun 24 2011, 06:23 AM Series9
Joe's garage rules are pretty simple:
1.) Le... Jun 24 2011, 11:55 AM Series9 Hey Wills, did you look at the video I posted?
... Jun 24 2011, 09:20 AM MoveQik
Hey Wills, did you look at the video I posted?
... Jun 24 2011, 09:38 AM Socalandy Twin plug it Wills :poke: Jun 24 2011, 11:33 AM r_towle twin plug, ITB's, and 3.4 p/c
Rich Jun 24 2011, 11:35 AM John
twin plug, ITB's, and 3.4 p/c
Rich
Just ho... Jun 24 2011, 11:53 AM Series9
twin plug, ITB's, and 3.4 p/c
Rich
Just h... Jun 24 2011, 11:57 AM John
[quote name='John' post='1499418' date='Jun 24 20... Jun 24 2011, 10:21 PM Series9
[quote name='John' post='1499418' date='Jun 24 2... Jun 25 2011, 06:25 AM racerbvd
[quote name='John' post='1499720' date='Jun 25 20... Jun 25 2011, 08:07 AM John
[quote name='John' post='1499720' date='Jun 25 20... Jun 25 2011, 01:39 PM MoveQik
[quote name='John' post='1499720' date='Jun 25 2... Jun 25 2011, 02:12 PM John
[quote name='John' post='1499960' date='Jun 25 20... Jun 25 2011, 02:49 PM MoveQik Aren't you guys full of ideas when it isn... Jun 24 2011, 12:32 PM MoveQik Just need to strap it to the pallet.
Joe would ha... Jun 24 2011, 01:50 PM Ferg I know you are going to plug the intakes, but if i... Jun 24 2011, 02:20 PM MoveQik
I know you are going to plug the intakes, but if ... Jun 24 2011, 02:47 PM racerbvd Or you could go steal a 964 or 993, then the engin... Jun 25 2011, 02:33 PM Series9 The 3.2 has arrived at the shipping terminal in Or... Jul 6 2011, 06:31 AM racerbvd Nice, you are getting a collection of 911 engines,... Jul 6 2011, 10:07 AM Madswede :agree: But he just put one back in ... which by m... Jul 6 2011, 06:13 PM Series9 Not the Vangon's first 3.2: Jul 6 2011, 06:30 PM MoveQik Let the fun begin! Jul 6 2011, 06:32 PM Series9
Let the fun begin!
I did pick this same on... Jul 6 2011, 06:41 PM Series9 Out of the box and on the stand: Jul 6 2011, 06:32 PM Series9 Leak-down numbers included one 90, one 88, two 80s... Jul 6 2011, 06:33 PM mepstein
Leak-down numbers included one 90, one 88, two 80... Jul 6 2011, 07:32 PM Series9
Leak-down numbers included one 90, one 88, two 8... Jul 6 2011, 07:38 PM mepstein
[quote name='mepstein' post='1505400' date='Jul 6... Jul 6 2011, 08:26 PM MoveQik
A pre-planned ouch$$$ :D
Soun... Jul 6 2011, 08:47 PM Series9 Nelson,
Check your thread on NARP.
I did a leak... Jul 6 2011, 07:41 PM John Keep the pics going. I'm currently rebuilding... Jul 6 2011, 08:44 PM Series9 Before disassembly, I cleaned the case on top. I... Jul 7 2011, 12:19 PM Series9 I checked the cam timing on both sides so I could ... Jul 7 2011, 12:22 PM Series9 The heads are off to the machinist: Jul 7 2011, 12:25 PM Madswede Thanks for the pictures. I learn so much from them... Jul 7 2011, 12:42 PM r_towle Joe, first off, its great to see what you are work... Jul 7 2011, 03:02 PM Series9
Joe, first off, its great to see what you are wor... Jul 7 2011, 04:59 PM SLITS You can use a 1/4" drive 5 mm hex alen socket... Jul 7 2011, 07:53 PM Series9
You can use a 1/4" drive 5 mm hex alen socke... Jul 7 2011, 09:51 PM r_towle
You can use a 1/4" drive 5 mm hex alen sock... Jul 15 2011, 06:49 AM Series9
[quote name='Series9' post='1505979' date='Jul 7 ... Jul 15 2011, 07:41 AM J P Stein
I do those by feel. Good and tight will get it.... Jul 16 2011, 07:02 AM MoveQik
Just a tad less than 14 ft/lbs is correct.
An... Jul 16 2011, 11:45 PM SLITS
You can use a 1/4" drive 5 mm hex alen sock... Jul 15 2011, 07:04 AM Series9 This is the reason Mahle piston/cylinder sets cost... Jul 14 2011, 06:57 PM Series9 Turd polishing.....
We've all done it.
Will... Jul 14 2011, 07:00 PM Series9 Clean parts. I've spent the last two days fac... Jul 14 2011, 07:02 PM racerbvd
Clean parts. I've spent the last two days fa... Jul 14 2011, 07:35 PM Ferg Joe, looking great as always.
BTW thanks for th... Jul 14 2011, 08:04 PM MoveQik
Joe, looking great as always.
BTW thanks for t... Jul 14 2011, 10:19 PM Drums66 .....Back on topic: :toke: :toke: :poke:
(btw ,... Jul 15 2011, 12:04 PM sixnotfour
= Gootentight
inch lb torque wrench with slits... Jul 15 2011, 12:14 PM Drums66 .....Towle torque wrench with a Slits socket :idea... Jul 15 2011, 12:36 PM J P Stein I'm waiting to see a dial bore gauge. :popcorn... Jul 15 2011, 09:16 PM Series9
I'm waiting to see a dial bore gauge. :popcor... Jul 16 2011, 07:17 AM SLITS I do believe that on the ClubNARP thread, Joe actu... Jul 15 2011, 10:21 PM J P Stein I didn't recognize it. Those I use read in ten... Jul 16 2011, 08:23 AM Series9 As a direct result of a little ribbing from Mr. St... Jul 16 2011, 07:51 PM MoveQik
I'll take pictures to prove it. You know I ... Jul 16 2011, 09:28 PM sixnotfour woh, I mentioned the torque wrench.
[/quote]inch ... Jul 16 2011, 11:35 PM SLITS A "Tad" is learned over many years of ex... Jul 17 2011, 07:51 AM J P Stein I no longer have my books but as I recall the torq... Jul 17 2011, 07:53 AM Series9 The heads should be on the way back any day now, s... Jul 27 2011, 04:47 PM Series9 Then I cleaned up the pistons, reringed them and s... Jul 27 2011, 04:52 PM Series9 The day did have a small snag.
One of the packs o... Jul 27 2011, 05:00 PM Series9 Parts and head bling: Aug 4 2011, 02:01 PM Series9 I expected stamps from the rebuilder, but how cool... Aug 4 2011, 02:04 PM John
I expected stamps from the rebuilder, but how coo... Aug 8 2011, 10:47 PM MoveQik
I expected stamps from the rebuilder, but how co... Aug 8 2011, 11:07 PM Series9
I expected stamps from the rebuilder, but how co... Aug 9 2011, 08:54 AM Series9 She'll be buttoned up by Saturday.
Paper weig... Aug 4 2011, 02:05 PM Madswede Dayum. :shades2: Now THAT is beautiful. Aug 4 2011, 02:39 PM MoveQik Ooooooooo giggity! :beer2: Aug 4 2011, 08:28 PM Eric_Shea (swap the 2.4 for that... he'll never know) Aug 5 2011, 07:46 AM MoveQik
(swap the 2.4 for that... he'll never know)
... Aug 5 2011, 08:15 AM Eric_Shea Suddenly? Keep it up... I'll spray my rock cu... Aug 5 2011, 08:34 AM Madswede Sitting here eating lunch prior to band practice, ... Aug 6 2011, 11:45 AM MoveQik Got my parts back from powder coating and the engi... Aug 7 2011, 05:25 PM Eric_Shea Nice! :trophy: Aug 8 2011, 09:37 AM euro911 :popcorn:
Looking good! Aug 9 2011, 12:12 AM Series9 I'm waiting on a couple of pieces from the pow... Aug 10 2011, 02:28 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th May 2024 - 12:09 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.