 Making of MUSR12 Plaques, For you picture junkies that like to see how stuff is made. :) |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| RJMII |
 Oct 26 2011, 02:38 PM
Post
#1
|
|
Jim McIntosh  Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None  |
(IMG:http://www.smalltowngeek.net/wp-content/uploads/2011/10/wpid-2011-08-29_12-25-56_453.jpg)
First scan of the 914 shell didn’t turn out so well. See how many holes are in it? Ouch! (IMG:http://www.smalltowngeek.net/wp-content/uploads/2011/10/wpid-2011-08-29_16-09-37_17.jpg) |
   |
 
|
| RJMII |
Oct 26 2011, 02:39 PM
Post
#2
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
A nice ‘flat grey’ primer should do the trick.
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661552.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661552.2.jpg) |
|
|
|
| RJMII |
Oct 26 2011, 02:39 PM
Post
#3
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
And it seems to not reflect the lasers as much.
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661572.1.jpg) |
|
|
|
| RJMII |
Oct 26 2011, 02:39 PM
Post
#4
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
The first cut paths were a little bit slow and poorly drawn:
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661586.1.jpg) (IMG:http://www.smalltowngeek.net/wp-content/uploads/2011/10/wpid-2011-10-04_13-03-49_923.jpg) |
|
|
|
| RJMII |
Oct 26 2011, 02:40 PM
Post
#5
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
The new ‘back and forth’ code seems to work much better:
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661612.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661612.2.jpg) |
|
|
|
| RJMII |
Oct 26 2011, 02:40 PM
Post
#6
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
|
|
|
|
| RJMII |
Oct 26 2011, 02:41 PM
Post
#7
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
The RC wheels code seemed to transfer nicely to the router table.
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661694.1.jpg) |
|
|
|
| RJMII |
Oct 26 2011, 02:42 PM
Post
#8
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
Applying some shiny surface/clear coat/stain:
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319662150.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319662150.2.jpg) |
|
|
|
| RJMII |
Oct 26 2011, 02:42 PM
Post
#9
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
All 13 cars and 7 appreciation gifts on my ‘portable workbench’:
(IMG:http://www.smalltowngeek.net/wp-content/uploads/2011/10/wpid-2011-10-11_09-24-09_2521.jpg) |
|
|
|
| RJMII |
Oct 26 2011, 02:43 PM
Post
#10
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
Finished and with vinyl:
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661794.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661794.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661794.3.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661839.1.jpg) |
|
|
|
| RJMII |
Oct 26 2011, 02:44 PM
Post
#11
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661875.1.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661875.2.jpg) To dispell any rumors or misconceptions that might exist or be caused to exist because of the following picture; This was an 'extra' that I made for Shoe because he worked his ass off to put together MUSR12. He had no idea it was in the box. The plan was to send it in a separate box, but the guy shipping the boxes was having problems with his TPS reports... (IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661875.3.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/www.smalltowngeek.net-8112-1319661876.4.jpg) |
|
|
|
| RJMII |
Oct 26 2011, 02:46 PM
Post
#12
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
|
|
|
|
| RJMII |
Oct 26 2011, 02:47 PM
Post
#13
|
|
Jim McIntosh Group: Members Posts: 3,125 Joined: 11-September 07 From: Sandy, Utah Member No.: 8,112 Region Association: None |
|
|
|
|
| poorsche914 |
Oct 26 2011, 02:51 PM
Post
#14
|
|
T4 Supercharged Group: Members Posts: 3,089 Joined: 28-May 09 From: Smoky Mountains Member No.: 10,419 Region Association: South East States |
Thanks for sharing the process.
These plaques turned out GREAT and I ended up with two of 'em (IMG:style_emoticons/default/piratenanner.gif)  (IMG:style_emoticons/default/driving.gif) |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 13th May 2024 - 06:17 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.