First scan of the 914 shell didn’t turn out so well. See how many holes are in it? Ouch!

A nice ‘flat grey’ primer should do the trick.

And it seems to not reflect the lasers as much.

The first cut paths were a little bit slow and poorly drawn:

The new ‘back and forth’ code seems to work much better:

All 13 cut out:

The RC wheels code seemed to transfer nicely to the router table.

Applying some shiny surface/clear coat/stain:

All 13 cars and 7 appreciation gifts on my ‘portable workbench’:

Finished and with vinyl:

To dispell any rumors or misconceptions that might exist or be caused to exist because of the following picture; This was an 'extra' that I made for Shoe because he worked his ass off to put together MUSR12. He had no idea it was in the box. The plan was to send it in a separate box, but the guy shipping the boxes was having problems with his TPS reports...

Cars with vinyl:

Thanks for sharing the process.
These plaques turned out GREAT and I ended up with two of 'em

Click to view attachment