Wheel center cap GB - $59 Fuch, Pedrini, Maule, Closes 4/11 - Who needs fuch knock off caps? or originals |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Wheel center cap GB - $59 Fuch, Pedrini, Maule, Closes 4/11 - Who needs fuch knock off caps? or originals |
Mikey914 |
Feb 3 2012, 11:09 PM
Post
#21
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Right on! I'll take a set for factory Fuchs and a set of knock-offs. I'll get you a measurement. These do fit the stock ones. There are 4 lug fuchs that have a larger opening. These do fit any of the stock wheels. As far as the depth, I figured out why they were so deep, the front caps, The shape needs some depth to make with a draw stamp for the OEM. There were enough knock offs made that I figured that it may be worth doing up at least a few extras for the knock offs. |
lonewolfe |
Feb 4 2012, 02:35 AM
Post
#22
|
Senior Member Group: Members Posts: 819 Joined: 12-September 11 From: Oakland, CA Member No.: 13,549 Region Association: Northern California |
I'd like to get a set from you. I have factory 4 spoke Fuchs wheels. Tell me what you need from me when you have a chance. Thx! I'm in production of the center caps again, and have had requests in the past for the knock off wheel caps. From my information received from another member the hole size that I need to fit is 2.4375", I planned to do 5 sets, but if there is a need for more, now is the time for me to do them. So if you need a set for your stock wheels, or larger size knock offs' sign up here. I will be doing these this weekend and will be sent to finishing this next week. Product will be ready to ship in 7 days. If you need the larger size, let me know as soon as possible, as I may be able to increase my production. 1st picture is the unfinished part; the second is finished and installed. I will be using a new process that will make the part slightly shinier. -Mark |
KENNY |
Feb 4 2012, 06:22 AM
Post
#23
|
Member Group: Members Posts: 142 Joined: 5-February 03 From: Orlando fl. Member No.: 243 Region Association: None |
I'm in production of the center caps again, and have had requests in the past for the knock off wheel caps. From my information received from another member the hole size that I need to fit is 2.4375", I planned to do 5 sets, but if there is a need for more, now is the time for me to do them. So if you need a set for your stock wheels, or larger size knock offs' sign up here. I will be doing these this weekend and will be sent to finishing this next week. Product will be ready to ship in 7 days. If you need the larger size, let me know as soon as possible, as I may be able to increase my production. 1st picture is the unfinished part; the second is finished and installed. I will be using a new process that will make the part slightly shinier. -Mark I will like a set please for my Fuchs wheels |
OU8AVW |
Feb 4 2012, 06:31 AM
Post
#24
|
Yacht Rigger Group: Members Posts: 1,803 Joined: 1-October 08 From: Granbury, TX Member No.: 9,601 Region Association: Southwest Region |
I'm in for a set for 2.0 Fuchs. Thanks!
|
Geezer914 |
Feb 4 2012, 06:55 AM
Post
#25
|
Geezer914 Group: Members Posts: 1,433 Joined: 18-March 09 From: Salem, NJ Member No.: 10,179 Region Association: North East States |
I'm in for a set of 4 to fit my Mahles
|
MDG |
Feb 4 2012, 07:14 AM
Post
#26
|
Wolf in wolf's clothing. Group: Members Posts: 8,652 Joined: 3-February 09 From: Toronto Member No.: 10,018 Region Association: None |
2 sets for 2.0 Fuchs please.
Thanks Mark! |
clapeza |
Feb 4 2012, 07:20 AM
Post
#27
|
Member Group: Members Posts: 229 Joined: 7-February 11 From: South GA Member No.: 12,677 Region Association: South East States |
I'll take a set for the knock-off Fuchs.
|
reharvey |
Feb 4 2012, 07:43 AM
Post
#28
|
Senior Member Group: Members Posts: 573 Joined: 16-July 08 From: N. E. Ohio Member No.: 9,308 Region Association: North East States |
Right on! I'll take a set for factory Fuchs and a set of knock-offs. I'll get you a measurement. These do fit the stock ones. There are 4 lug fuchs that have a larger opening. These do fit any of the stock wheels. As far as the depth, I figured out why they were so deep, the front caps, The shape needs some depth to make with a draw stamp for the OEM. There were enough knock offs made that I figured that it may be worth doing up at least a few extras for the knock offs. I'll take one set for my stock OEM Fuchs. Thanks |
7TPorsh |
Feb 4 2012, 12:10 PM
Post
#29
|
7T Porsh Group: Members Posts: 2,691 Joined: 27-March 06 From: Glendale Ca Member No.: 5,782 Region Association: Southern California |
In for a set of 4. Have to check the size. 2.0 knockoffs of some sort.
|
7TPorsh |
Feb 4 2012, 12:11 PM
Post
#30
|
7T Porsh Group: Members Posts: 2,691 Joined: 27-March 06 From: Glendale Ca Member No.: 5,782 Region Association: Southern California |
In for a set of 4. Have to check the size. 2.0 knockoffs of some sort.
ooops |
TJB/914 |
Feb 4 2012, 01:39 PM
Post
#31
|
Mid-Engn. Group: Members Posts: 4,333 Joined: 24-February 03 From: Plymouth & Petoskey, MI Member No.: 346 Region Association: Upper MidWest |
|
falconfp2001 |
Feb 4 2012, 01:57 PM
Post
#32
|
Pancho Pantera Group: Members Posts: 451 Joined: 5-December 10 From: Downey, CA Member No.: 12,456 Region Association: Southwest Region |
So, how will we do payment? I still want a set for Pedrini.
Thanks |
Mikey914 |
Feb 5 2012, 11:53 AM
Post
#33
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
I'm in for a set of 4 to fit my Mahles Mikey914 I also need (4) for my spare Mahles. I am still not clear about the price @ $59.00?? I assume this is the total price for a set of (4) plus shipping? Tom Yes, $59. The shipping was not included as we have some international friends that sign up too. Domestic I'd plan $5 for priority mail. I'll also throw in any other small parts you may need. I'll be contacting those that have signed up on the thread when The finising schedule is finalized. -Mark |
zig-n-zag |
Feb 6 2012, 02:07 PM
Post
#34
|
Member Group: Members Posts: 182 Joined: 18-May 06 From: Hawaii Member No.: 6,024 |
I'll buy a set for my factory 4-lug Fuchs. Thanks again.
|
usros |
Feb 6 2012, 02:23 PM
Post
#35
|
Newbie Group: Members Posts: 11 Joined: 29-August 04 From: Malvern, Oh Member No.: 2,647 Region Association: None |
I would like a set for my OEM Fuchs Thanks
|
eric9144 |
Feb 6 2012, 03:38 PM
Post
#36
|
Advanced Member Group: Members Posts: 2,734 Joined: 30-March 11 From: San Diego, CA Member No.: 12,876 Region Association: Southern California |
In case anyone is curious--they are perfect works of art, here's some pics for anyone still on the fence about picking them up--the fit, finish and quality are IMHO, better than the NLA stock ones:
|
zymurgist |
Feb 6 2012, 03:48 PM
Post
#37
|
"Ace" Mechanic Group: Members Posts: 7,411 Joined: 9-June 05 From: Hagerstown, MD Member No.: 4,238 Region Association: None |
I would like one set for stock Mahle wheels.
|
aircooledtechguy |
Feb 6 2012, 06:11 PM
Post
#38
|
The Aircooledtech Guy Group: Members Posts: 1,966 Joined: 8-November 08 From: Anacortes, WA Member No.: 9,730 Region Association: Pacific Northwest |
I'm in for a set for my factory Mahle wheel w/ 60mm centers (IMG:style_emoticons/default/beerchug.gif)
|
Mikey914 |
Feb 7 2012, 01:21 AM
Post
#39
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
From what I've seen so far the knock offs are 2.437 dia Holes. Anyone what to check to see if thire knock off's are this size, the stock wheels I've got covered, so, it would be nice to confirm a few measurements to see if this will work. I plan to run these in the next day.
|
euro911 |
Feb 7 2012, 01:37 AM
Post
#40
|
Retired & living the dream. God help me if I wake up! Group: Members Posts: 8,851 Joined: 2-December 06 From: So.Cal. & No.AZ (USA) Member No.: 7,300 Region Association: Southern California |
I'd like to put some center caps on my ATS wheels, but I don't know the diameter. I believe they're larger than the wheels that have been mentioned (IMG:style_emoticons/default/confused24.gif)
I'll have to check when I get over to the shop tomorrow. |
Lo-Fi Version | Time is now: 31st May 2024 - 11:49 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |