 rear wheel bearing stuck, ($*@#(*!@& it! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| seanery |
 Sep 15 2004, 02:22 PM
Post
#1
|
|
waiting to rebuild whitey!  Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None  |
any ideas?
passenger side came right out. driver side doesn't seem to move at all. I'm using a 3lb hammer and a 36mm 1/2 drive socket with 8" extension. I have a 5 lb hammer, but no room to swing it under the car. |
   |
 
|
Posts in this topic
seanery rear wheel bearing stuck Sep 15 2004, 02:22 PM
fiid you could try warming the trailing arm/housing up... Sep 15 2004, 02:24 PM d914 slide hammer and pull it. Use a wheel adapter or a... Sep 15 2004, 02:26 PM SpecialK Had the same problem with mine ('73) a couple ... Sep 15 2004, 02:32 PM jim912928 Same exact scenario on mine...passenger side came ... Sep 15 2004, 04:01 PM Doug Leggins I have a tool that I used. It is 2 aluminum plates... Sep 15 2004, 04:11 PM lapuwali I've never done this (but need to), so I'l... Sep 15 2004, 05:19 PM seanery I thought that same thing, too.
BUT, if those suck... Sep 15 2004, 05:57 PM seanery I turned the socket around (more contact area on t... Sep 15 2004, 06:02 PM
jim912928 AMEN! Sep 15 2004, 07:57 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th May 2024 - 10:38 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.