 L-Jet Relay Board Question, Using I and IV to bump the starter ? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jim_hoyland |
 Jun 17 2012, 11:33 AM
Post
#1
|
|
Get that VIN ?  Group: Members Posts: 9,301 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California 
 |
The L-Jet doesn't use the 4 wire connector at the rear of the relay board. like the picture below A yellow wire from the dual relay attaches to II or IV ( they are linked ).
Spade I is hot when the key is on; but it's not used on the L-Jet. Can I mount a momentary switch between Spade I and Spade IV to bump start the engine. I think Clay Perrine brought this up once upon a time. Attached image(s) 
|
   |
 
|
Posts in this topic
jim_hoyland L-Jet Relay Board Question Jun 17 2012, 11:33 AM
kg6dxn Looks like it will work to me on terminal 2 (II)
Jun 17 2012, 11:46 AM Dave_Darling It should work, but you will want to make sure tha... Jun 17 2012, 12:38 PM
Tom Jim,
While that would work electrically, the ... Jun 17 2012, 12:44 PM jim_hoyland
Jim,
While that would work electrically, the... Jun 17 2012, 02:20 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 07:17 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.