 Driver side mirror drill template?, Looking for some help here fellas |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jersey914 |
 Oct 6 2012, 10:21 PM
Post
#1
|
|
Member  Group: Members Posts: 161 Joined: 6-September 12 From: Marlton, NJ Member No.: 14,895 Region Association: North East States  |
The PO filled in the mirror holes with "weld" and now the are unusable because they are full of weld material. I figured I would drill trough the weld material but that has proved impossible because of the lack of space and the fact that I Cant see well up in there. It looks like my best option is to drill from the outside and try to get as close the the right location as possible and then put some new lock nuts on the end of the threads from inside the door.
Has anybody created a good template for the OEM mirrors so that I can drill from the outside and be done this debacle? I want the mirrors mounted as close to spec as possible. Please advise!! rob (IMG:style_emoticons/default/confused24.gif) |
   |
 
|
Posts in this topic
jersey914 Driver side mirror drill template? Oct 6 2012, 10:21 PM
Elliot Cannon If you can use a center punch on the inside and ma... Oct 7 2012, 12:22 AM
jersey914
If you can use a center punch on the inside and m... Oct 7 2012, 07:08 AM t collins Rob,
I took the following measurements from my 71 ... Oct 7 2012, 08:06 AM jersey914
Rob,
I took the following measurements from my 71... Oct 7 2012, 08:09 AM t collins Sorry,guess this would help!
Oct 7 2012, 08:12 AM jersey914
Sorry,guess this would help!
So Tom, if i... Oct 7 2012, 08:51 AM t collins No, its 27.5" from the rear of the door to th... Oct 7 2012, 09:02 AM Harpo I just got back from the garage to take this photo... Oct 7 2012, 08:28 AM Harpo Are the dimensions the same Right & left?
DAv... Oct 7 2012, 08:54 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 02:44 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.