 Rear Caliper Spacers, Run Vented Rotors On Rear |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914gem |
 May 18 2003, 10:08 AM
Post
#1
|
|
Member  Group: Members Posts: 91 Joined: 5-January 03 From: Greenwood Arkansas Member No.: 89  |
I want to run vented rotors on the rear and couldn't find any one that had spacers. I saw an artical where Porsche offered spacers at one time and I've seen a set on a car in Kansas. Friday I split a caliper and took it to a local machine shop. They are going to set up a program on a CNC starting the first of the week and run a min of 25 each of top and bottom spacers.They said it would be 2 to 3 weeks before I would get them since they are backed up on work.If these turn out to work OK I will have a few sets left over if any one else is interested. I have a guy here in town that all he does for the last 20 years is rebuild calipers and test them, he will be the one to rebuild mine and test them to see if they will work OK. Let me know if you are interested in a set.
|
   |
 
|
Posts in this topic
914gem Rear Caliper Spacers May 18 2003, 10:08 AM
tesserra I have interest in vented rear rototrs/caliper set... May 18 2003, 09:51 PM mr914 Me too! I'm interested.
Let us know wh... May 19 2003, 06:00 AM
Brad Roberts Make sure you can get the O-rings for the halves. ... May 19 2003, 07:09 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2024 - 01:23 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.