Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> 914World Classifieds Rules

We've established the following rules to help make your sales/purchases as successful as possible!
- Please List WTB:, FS:, TRADE: etc (want to buy, for sale, and trade respectively) before your add title.
- You *must* put a price in your ad and state how you would like payment!
- If you'd like to bump your ads, feel free to do so every two days.
- DO NOT MAKE YOUR ADS IN ALL CAPITAL LETTERS! It's considered rude.
- All eBay ads belong in the eBay category.
- Please consolidate your ads into one big lump... listings and pictures together in one thread. Please be considerate of other classified users!!
- Mark your items "SOLD" once you sell them. Please do not ask to have ads removed. Ads will automatically hide themselves after 30 days. We also ask that you leave your pricing in the ads to help others determine fair market value for future sales.

2 Pages V  1 2 >  
 Reply to this topicStart new topic
> HAM moving sale Too much to list in detail, Everything priced to move fast!
HAM Inc
post May 20 2013, 01:33 PM
Post #1


Senior Member
***

Group: Members
Posts: 846
Joined: 24-July 06
From: Watkinsville,GA
Member No.: 6,499
Region Association: None
Hoffman Automotive Machine is having a moving sale Sat May 25. I would prefer not to ship at these prices, but I am willing to, but only after the Sat sale.[i]
Take a look at the pics.
A lot of this stuff is left over from our FP road race program.
Rear 914 calipers were working when removed. $70.00

3 pairs of shorty manifolds, 2- 4 stud, 1- 3 stud. All for $75.00 or $35.00/

1 pair of uber-rare 3 stud Solex mans. These were port matched to race heads by Dave Finch. Very nice and a perfect template to match to another pair of heads. $100.00

A nice Std 1.7/1.8 crank with gears & spacer. $35.00

2 901 mainshafts. One is an F $10.00 pick-up only.
The other shaft gear has been machined down to 1.261" accept a different second gear. $35.00 Pick-up. Will ship, but UPS and will need complete addy to determine cost.

2 sets of 1.7 rockers. 75.00/set

Misc. pushrods including 2 adjustables. $25.00 for all.

Early 009 distributor. $10.00

911 Front hub with long verbus studs, new seals & bearings with the races already installed. This was a spare for the race car. Never needed it. $25.00

A worn cam with a good gear and clearanced bolts. $10.00 Will ship the gear & bolts.

The progressive carb intake assembly is $25.00

A complete 7mm custom steel race valve 42 x 34 conversion with Cryo'd and REM'd conical Crower springs with, 5 gram Crower ti retainers. Ex valves are new, as are the springs and retainers. $75.00

HAM custom phenolic intake insulators. Universal 3&4 stud man to head $15.00/pair.
Solex pattern and Web/Del carb (not universal pattern) to man. $25.00/set of 4.



There's more here to see. If you're in the area please come by. Sale starts at 8:00am May 25
Hoffman Automotive Machine
1880 Commerce Rd Suite 211
Athens, GA 30607
I also have lots of T4 heads, and some O.E. dual port T1 heads. Misc, BMW cylinder heads and parts. All going for drop-dead prices. All need work.
Misc. parts left over from our extensive crank case breather testing. Come by and wade through.
Attached Image Attached ImageAttached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tweet
post May 20 2013, 01:39 PM
Post #2


Member
**

Group: Members
Posts: 200
Joined: 25-February 13
From: South Florida
Member No.: 15,579
Region Association: South East States

I'll take the hub. Can you fit it in a postal flat rate box?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
HAM Inc
post May 20 2013, 01:50 PM
Post #3


Senior Member
***

Group: Members
Posts: 846
Joined: 24-July 06
From: Watkinsville,GA
Member No.: 6,499
Region Association: None
Probably. You'll be first in line for it if it doesn't sell Sat
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
monkeyboy
post May 20 2013, 02:18 PM
Post #4


Senior Member
***

Group: Members
Posts: 808
Joined: 8-June 08
From: Los Angeles, Ca
Member No.: 9,147
Region Association: None
I'll take the 1.7 rockers if you will ship them.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
monkeyboy
post May 20 2013, 02:18 PM
Post #5


Senior Member
***

Group: Members
Posts: 808
Joined: 8-June 08
From: Los Angeles, Ca
Member No.: 9,147
Region Association: None
I'll take the 1.7 rockers if you will ship them.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
brant
post May 20 2013, 02:29 PM
Post #6


914 Wizard
**********

Group: Members
Posts: 11,625
Joined: 30-December 02
From: Colorado
Member No.: 47
Region Association: Rocky Mountains
2nd for the 911 hub (a spare for my race car also)

and I would take the 901 main shaft that is machined down, if your willing to ship it... I can pm you a full address if its ok with you?

brant
User is online!Profile CardPM
Go to the top of the page
+Quote Post
HAM Inc
post May 20 2013, 02:32 PM
Post #7


Senior Member
***

Group: Members
Posts: 846
Joined: 24-July 06
From: Watkinsville,GA
Member No.: 6,499
Region Association: None
I will ship, but only after the sale Sat. First come first served.

Thanks everyone! Wish you guys were all closer so you could come by and chat and rummage and walk out the door with these goodies.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
brant
post May 20 2013, 02:34 PM
Post #8


914 Wizard
**********

Group: Members
Posts: 11,625
Joined: 30-December 02
From: Colorado
Member No.: 47
Region Association: Rocky Mountains
fair enough
I wish I was closer also

after saturday can you update on this thread if its still available?

tia
brant
User is online!Profile CardPM
Go to the top of the page
+Quote Post
HAM Inc
post May 20 2013, 05:17 PM
Post #9


Senior Member
***

Group: Members
Posts: 846
Joined: 24-July 06
From: Watkinsville,GA
Member No.: 6,499
Region Association: None
Once the sale is over I'll post what's left.

Hope some of you in the area can drop by.
Len (IMG:style_emoticons/default/beerchug.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dfelz
post May 20 2013, 06:04 PM
Post #10


beach bum
**

Group: Members
Posts: 419
Joined: 7-June 12
From: San Diego
Member No.: 14,538
Region Association: Southern California
If one of the adjustable pushrods is available after saturday i would love to take it. Good luck with the sale!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
hot_shoe914
post May 20 2013, 08:24 PM
Post #11


on ramp passer
****

Group: Members
Posts: 3,802
Joined: 20-November 07
From: Earle, Ar.
Member No.: 8,354
Region Association: None
Hmmm, I was considering a trip to Atlanta this weekend, maybe I should make the trip after all.

(IMG:style_emoticons/default/idea.gif) (IMG:style_emoticons/default/idea.gif) (IMG:style_emoticons/default/idea.gif) (IMG:style_emoticons/default/idea.gif) (IMG:style_emoticons/default/idea.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
HAM Inc
post May 21 2013, 08:20 AM
Post #12


Senior Member
***

Group: Members
Posts: 846
Joined: 24-July 06
From: Watkinsville,GA
Member No.: 6,499
Region Association: None
QUOTE
Hmmm, I was considering a trip to Atlanta this weekend, maybe I should make the trip after all.

Come on down. We're only an hour East of North Atlanta.

We also have a set of 93mm jugs with no cracked fins. They are perfect for boring to 96mm. $25.00 no shipping on these.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
HAM Inc
post May 21 2013, 03:34 PM
Post #13


Senior Member
***

Group: Members
Posts: 846
Joined: 24-July 06
From: Watkinsville,GA
Member No.: 6,499
Region Association: None
Still pulling goodies out of nooks and crannies.

Found a single Solex 40P11-4 that appears to be in good condition. $65.00
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
lonewolfe
post May 21 2013, 04:32 PM
Post #14


Senior Member
***

Group: Members
Posts: 819
Joined: 12-September 11
From: Oakland, CA
Member No.: 13,549
Region Association: Northern California
I could use a couple sets of the phenolic intake spacers, and adjustable pushrod and am intersted in a pair of heads 42/36 or 44/36. 2.0l heads would be ideal but 1.7 or 1.8 heads updated to larger valves would work as well. I'm building both 1911cc and 2258cc motors. Let me know what you might have left!

Thanks,

Mark




QUOTE(HAM Inc @ May 20 2013, 12:33 PM) *

Hoffman Automotive Machine is having a moving sale Sat May 25. I would prefer not to ship at these prices, but I am willing to, but only after the Sat sale.[i]
Take a look at the pics.
A lot of this stuff is left over from our FP road race program.
Rear 914 calipers were working when removed. $70.00

3 pairs of shorty manifolds, 2- 4 stud, 1- 3 stud. All for $75.00 or $35.00/

1 pair of uber-rare 3 stud Solex mans. These were port matched to race heads by Dave Finch. Very nice and a perfect template to match to another pair of heads. $100.00

A nice Std 1.7/1.8 crank with gears & spacer. $35.00

2 901 mainshafts. One is an F $10.00 pick-up only.
The other shaft gear has been machined down to 1.261" accept a different second gear. $35.00 Pick-up. Will ship, but UPS and will need complete addy to determine cost.

2 sets of 1.7 rockers. 75.00/set

Misc. pushrods including 2 adjustables. $25.00 for all.

Early 009 distributor. $10.00

911 Front hub with long verbus studs, new seals & bearings with the races already installed. This was a spare for the race car. Never needed it. $25.00

A worn cam with a good gear and clearanced bolts. $10.00 Will ship the gear & bolts.

The progressive carb intake assembly is $25.00

A complete 7mm custom steel race valve 42 x 34 conversion with Cryo'd and REM'd conical Crower springs with, 5 gram Crower ti retainers. Ex valves are new, as are the springs and retainers. $75.00

HAM custom phenolic intake insulators. Universal 3&4 stud man to head $15.00/pair.
Solex pattern and Web/Del carb (not universal pattern) to man. $25.00/set of 4.



There's more here to see. If you're in the area please come by. Sale starts at 8:00am May 25
Hoffman Automotive Machine
1880 Commerce Rd Suite 211
Athens, GA 30607
I also have lots of T4 heads, and some O.E. dual port T1 heads. Misc, BMW cylinder heads and parts. All going for drop-dead prices. All need work.
Misc. parts left over from our extensive crank case breather testing. Come by and wade through.
Attached Image Attached ImageAttached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
HAM Inc
post May 21 2013, 05:48 PM
Post #15


Senior Member
***

Group: Members
Posts: 846
Joined: 24-July 06
From: Watkinsville,GA
Member No.: 6,499
Region Association: None
QUOTE
I could use a couple sets of the phenolic intake spacers, and adjustable pushrod and am intersted in a pair of heads 42/36 or 44/36. 2.0l heads would be ideal but 1.7 or 1.8 heads updated to larger valves would work as well. I'm building both 1911cc and 2258cc motors. Let me know what you might have left!

Thanks,

I'll put you down for a pair of phenolic intake spacers and an adj pushrod if they don't sell.
None of the heads are ready to install. They are all cores in need of complete rebuilding, and most need some repairs, as is typical of T4 heads.
All items including heads are sold as is.

I'm scrapping a lot of T4 heads because they don't meet my criteria for re-manufacture. That doesn't mean some other shops wouldn't take them on. I'm offering them for pick-up only. Otherwise they're just more damn trouble than they're worth.

If you'e still interested in a pair let me know and I'll sort through what's left after the sale and let you know what's available.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JFJ914
post May 22 2013, 08:46 AM
Post #16


Senior Member
***

Group: Benefactors
Posts: 813
Joined: 13-June 03
From: Alpharetta, GA
Member No.: 814
Region Association: South East States
Len, are you keeping the jig to deck T4 blocks?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
HAM Inc
post May 22 2013, 09:20 AM
Post #17


Senior Member
***

Group: Members
Posts: 846
Joined: 24-July 06
From: Watkinsville,GA
Member No.: 6,499
Region Association: None
QUOTE
Len, are you keeping the jig to deck T4 blocks?

Yep. It's on a dedicated mill that I also use for fly cutting heads.

When a case is decked on the same fixture the heads are fly cut on and the mill is trammed to .0000001" the resulting fit of cylinders to case and heads is perfect.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
HAM Inc
post May 23 2013, 07:49 AM
Post #18


Senior Member
***

Group: Members
Posts: 846
Joined: 24-July 06
From: Watkinsville,GA
Member No.: 6,499
Region Association: None
Also found a tool I made that clamps in a vise to hold cranks. One end has a flange for a T4 crank, the other an old gland nut that will hold a T1 or 356/912 crank.
Pic coming soon.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
lonewolfe
post May 23 2013, 12:55 PM
Post #19


Senior Member
***

Group: Members
Posts: 819
Joined: 12-September 11
From: Oakland, CA
Member No.: 13,549
Region Association: Northern California
QUOTE(HAM Inc @ May 23 2013, 06:49 AM) *

Also found a tool I made that clamps in a vise to hold cranks. One end has a flange for a T4 crank, the other an old gland nut that will hold a T1 or 356/912 crank.
Pic coming soon.


I'm intersted in this tool! How much are you asking for this? PM sent!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
r_towle
post May 25 2013, 12:11 PM
Post #20


Custom Member
***************

Group: Members
Posts: 24,574
Joined: 9-January 03
From: Taxachusetts
Member No.: 124
Region Association: North East States
Interested in your short manifolds (t4 heads, webers)

Also interested in the Solex manifolds if they are for a t4 head.

Good luck with the sale, hope it helps clear out the inventory.

Rich
User is online!Profile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · FS/WTB: 914 Parts · Next Newest »
 

2 Pages V  1 2 >
Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 18th May 2024 - 07:48 PM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...