![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
Mueller |
![]()
Post
#1
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,150 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
I need one or a few for testing out how to modify my engine for the best head to cylinder sealing.
My plan is to machine a step in the top of the cylinder and a matching step in the head. Cracked, rusted, big holes,........it shouldn't matter Thanks SF Bay Area |
Brad Roberts |
![]()
Post
#2
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,148 Joined: 23-December 02 Member No.: 8 Region Association: None ![]() |
I have everything you need.
I'll load it tonight and show you what TechCraft does for cylinder sealing on the Type4's (tomorrow) B |
Mueller |
![]()
Post
#3
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,150 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
Cool, I was going to call you, but I figured I'd ask you at lunch tommorow.
Want to see if Tony C wants to join us? I'm outta here, time to sit in traffic for an hour + (IMG:style_emoticons/default/sad.gif) |
Brad Roberts |
![]()
Post
#4
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,148 Joined: 23-December 02 Member No.: 8 Region Association: None ![]() |
Yeah.. ask him. I have a electric bill for him also..
B |
Jeff Krieger |
![]()
Post
#5
|
Unregistered ![]() |
QUOTE(Mueller @ May 20 2003, 05:42 PM) I need one or a few for testing out how to modify my engine for the best head to cylinder sealing. My plan is to machine a step in the top of the cylinder and a matching step in the head. Cracked, rusted, big holes,........it shouldn't matter Thanks SF Bay Area Add OHCs to the head while you're at it. How did the late-model, air-cooled 911 heads seal with their cylinders? |
meursault |
![]()
Post
#6
|
Idjit Savant ![]() ![]() Group: Members Posts: 290 Joined: 26-February 03 From: San Diego, CA Member No.: 355 ![]() |
I think anything later than an early 2.0 liter six used grooves machined into the cylinders to accept a crushable metal gasket.
|
Tony C |
![]()
Post
#7
|
Master of Fire and Metal ![]() ![]() Group: Members Posts: 273 Joined: 27-December 02 From: Bay Area, CA, USA, Earth Member No.: 25 ![]() |
B are you coming down to the southbay or is lunch up there. If its up there I can't make it. I am leaving at 3 for the track with a car in tow.
-Tony |
Mueller |
![]()
Post
#8
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,150 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
Tony, he is going to be down in our area.....
Got those parts for me to look at? (oil manifold??) |
jonwatts |
![]()
Post
#9
|
no rules, just wrong ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,321 Joined: 13-January 03 From: San Jose, CA Member No.: 141 ![]() ![]() |
Our area? And no one invited me? I must smell bad or something. (IMG:style_emoticons/default/blink.gif)
|
Scott Carlberg |
![]()
Post
#10
|
Porsche MOTORSPORTS ![]() ![]() ![]() Group: Members Posts: 1,595 Joined: 17-April 03 From: Modesto, Ca Member No.: 580 ![]() |
Lunch with other Teeners?
I own a 914, and I LOVE having LUNCH. Is this an open event, or by invitation only?? When & Where??? |
Tony C |
![]()
Post
#11
|
Master of Fire and Metal ![]() ![]() Group: Members Posts: 273 Joined: 27-December 02 From: Bay Area, CA, USA, Earth Member No.: 25 ![]() |
Mike, Yes I do have the manifold. Anyone is welcome to come to lunch. Shall we meet at my shop at 11:30-12pm? The address is: 1755 Houret ct, Milpitas CA, 95035. It is right off 880 and Montague Exp.
-Tony |
jonwatts |
![]()
Post
#12
|
no rules, just wrong ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,321 Joined: 13-January 03 From: San Jose, CA Member No.: 141 ![]() ![]() |
Well, since I just got in to work at 12:30 I guess I might not make lunch (IMG:style_emoticons/default/laugh.gif)
Next time most definitely. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 27th April 2025 - 12:20 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |