 Outer CV Joint Removal..., Need some advice |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Joseph Mills |
 Dec 12 2004, 05:18 PM
Post
#1
|
|
on a Sonoma diet now...  Group: Members Posts: 1,482 Joined: 29-December 02 From: Oklahoma City, OK Member No.: 39  |
After removing the four star bolts from the outer CV joint (at the wheel), I removed the axle with the circlip, cage and balls in place (which are all in good shape). However, the CV joint "hub" itself (with the two guide pins) has not budged from the "wheel hub flange".
With the inner CV joint (next to the transaxle), the hub is totally exposed and a few taps with a hammer and then careful prying with a screwdriver and the hub comes right off the "transaxle flange". But since the outer hub is located deep inside the suspension arm, it is difficult to get to. Any advice, tips, or tools that may help me break this thing loose? |
   |
 
|
Posts in this topic
Joseph Mills Outer CV Joint Removal... Dec 12 2004, 05:18 PM
redshift Never done it.... but here's a bump for a quic... Dec 12 2004, 05:50 PM Aaron Cox pull the stub axle then. one BIG bolt on the wheel... Dec 12 2004, 05:59 PM Gary I'm having a tough time picturing where you ar... Dec 12 2004, 06:03 PM LvSteveH I'm guessing that you are saying that the body... Dec 12 2004, 06:08 PM Joseph Mills SteveH,Dec 12 2004, 06:08 PM]
"I'm guessing th... Dec 12 2004, 07:06 PM James Adams You usually need to pull the stub axle to get the ... Dec 12 2004, 07:20 PM LvSteveH I wouldn't try heat, I think that's extrem... Dec 12 2004, 07:31 PM Series9 ... Dec 12 2004, 09:08 PM JOHNMAN So, I'm not sure exactly what you have done. ... Dec 12 2004, 09:35 PM
Eric_Shea :agree: with John. It's not extreme or costl... Dec 13 2004, 11:50 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 04:53 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.