Car Numbers, Source? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Car Numbers, Source? |
dmilzoff |
May 25 2003, 08:12 AM
Post
#1
|
Member Group: Members Posts: 67 Joined: 2-March 03 From: Ossining, NY Member No.: 377 |
Any suggestions where I can get the paste on numbers for DE? I ruined my sail panel last time because the white shoe polish didn't come off completely.
|
Joe Bob |
May 25 2003, 08:25 AM
Post
#2
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
The local sign places sell magnetic covers that you can put #s on.....they will fall off on speeds over 50-60 mph unless you use tape on the leading edge.
Or you can decide on a number.....and then get a whole bunch of vinyl numbers and stick them on for the race and then remove them....any residue comes off with acetone.... |
VegasRacer |
May 25 2003, 08:53 AM
Post
#3
|
ELVIRA Group: Benefactors Posts: 8,509 Joined: 27-March 03 From: Between Scylla and Charybdis Member No.: 481 Region Association: None |
I recently needed some graphics done. (A banner)
Had always used a local quick print place before. Did some comparison shopping on eBay and the Internet. I went with Megagraphics in Houston, TX. jlmoritz@swbell.net Great service. Fast delivery. Best quality. Highly recommended. 50% cheaper than anything I could find local. Check 'em out. |
Zeke |
May 25 2003, 09:05 AM
Post
#4
|
Never left, but not right.... Group: Members Posts: 381 Joined: 26-January 03 From: Long Beach CA Member No.: 197 Region Association: None |
Here's another: http://www.edecals.com/raceg/index.htm
|
Joe Bob |
May 25 2003, 09:50 AM
Post
#5
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
The guy that makes my Carrera graphics made me up 20 sets of numbers....set me up with "070, 071 and 072"......I've had them a year and still have some left...of course I don't race as much now due to AYSO (all Sunday/Saturday(s) are occupied) soccer, the grage project, the 356 project....
|
seanery |
May 25 2003, 05:09 PM
Post
#6
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
Kennedy Fabrication did mine, they are reusable and say PORSCHE in the right font under the #'s. Pretty cool.
|
dmilzoff |
May 25 2003, 05:22 PM
Post
#7
|
Member Group: Members Posts: 67 Joined: 2-March 03 From: Ossining, NY Member No.: 377 |
That sounds really cool. Can't find Kennedy Fabrication. Do you have a web site or tel no?
|
seanery |
May 25 2003, 05:42 PM
Post
#8
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
hmmm....I'll report back...
Got his info when I was on the 356Talk list...I'll see if I can find it. Zois is on that list, maybe he can get the info if I can't. |
seanery |
May 25 2003, 07:15 PM
Post
#9
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
I can't get to the vendor page for the 356 Registry. I let my membership expire when I sold my car.
Zois, Can you find the info for Kennedy Fab? He's on the 356 Reg talk list. |
Joe Bob |
May 25 2003, 07:49 PM
Post
#10
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
Not a member, sorry....I won't join a group that will stoop to have me....
|
seanery |
May 26 2003, 07:03 AM
Post
#11
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
are you still on the talk list?
|
Joe Bob |
May 26 2003, 08:05 AM
Post
#12
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
I lurk....
|
seanery |
May 26 2003, 08:07 AM
Post
#13
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
I think the guy's name is George Kennedy.
Can you ask him to email me regarding the die cut numbers he did a couple years ago? seanery@msn.com Thanks! |
Chris914n6 |
May 27 2003, 02:40 AM
Post
#14
|
Jackstands are my life. Group: Members Posts: 3,321 Joined: 14-March 03 From: Las Vegas, NV Member No.: 431 Region Association: Southwest Region |
I've still got all my equipment from my sign shop years and a bunch of leftover vinyl.
Send me a vector file in CorelDraw (.cdr) or Illustraitor (.ai), color choices, if you want it on magnetic sheet, and what your willing to pay for it. In other words... don't make me think (IMG:style_emoticons/default/huh.gif) Keep the largest number under 11.5"x15" and postage will be $1.00. Magnetic sheet for 2 doors costs me approx. $20. I have the PORSCHE font. Can also do drop shadows or outlines, but understand it takes twice the time. Be prepared to attach your font if it is something unique. Contact me directly at chris@914resources.com (IMG:style_emoticons/default/beerchug.gif) Chris 75 914n6 (IMG:style_emoticons/default/driving.gif) |
Gint |
May 27 2003, 07:06 AM
Post
#15
|
Mike Ginter Group: Admin Posts: 16,075 Joined: 26-December 02 From: Denver CO. Member No.: 20 Region Association: Rocky Mountains |
Chris,
Is that your 914 in your avatar? Can you post pics in the Members 914 Pictures thread? Thanks! Looks like a nice car. It also looks like the rear fenders are flared. I'd love to see pics! |
Part Pricer |
May 27 2003, 07:30 AM
Post
#16
|
Believe everything I post Group: Benefactors Posts: 1,825 Joined: 28-December 02 From: Danbury, CT Member No.: 35 |
|
Gint |
May 27 2003, 07:36 AM
Post
#17
|
Mike Ginter Group: Admin Posts: 16,075 Joined: 26-December 02 From: Denver CO. Member No.: 20 Region Association: Rocky Mountains |
Wait a minute! Is this the same Chris that my wife Sharon, Rich and Joy Herzog pimped water into during the West Coast Wramble last year?
|
Chris914n6 |
May 27 2003, 02:19 PM
Post
#18
|
Jackstands are my life. Group: Members Posts: 3,321 Joined: 14-March 03 From: Las Vegas, NV Member No.: 431 Region Association: Southwest Region |
QUOTE(Gint @ May 27 2003, 05:36 AM) Wait a minute! Is this the same Chris that my wife Sharon, Rich and Joy Herzog pimped water into during the West Coast Wramble last year? Yep, that's me (IMG:style_emoticons/default/wavey.gif) The flares are just the "bat rolling method" after the "pull the fenders over really wide tires and lower the car method" didn't produce enough results. I'll see if I can get decent pics. Wow, I forgot how old that pic is already... Don's FunRun and still a 4 banger. The bumper grilles are lightless black pieces now. Question- curious how loud my car was compared to the typical 4 cyl 914? |
Jeroen |
May 27 2003, 02:44 PM
Post
#19
|
914 Guru Group: Members Posts: 7,887 Joined: 24-December 02 From: The Netherlands Member No.: 3 Region Association: Europe |
Chris,
Great looking car! Can you tell us what size the Boxster wheels are and what size of spacers were needed to mount them? cheers, Jeroen |
Chris914n6 |
May 29 2003, 04:48 PM
Post
#20
|
Jackstands are my life. Group: Members Posts: 3,321 Joined: 14-March 03 From: Las Vegas, NV Member No.: 431 Region Association: Southwest Region |
The wheels are stock Boxster. 16" x 6" & 7" with 205/55 and 225/50 tires. Current spacers are the common cast aluminum 5/16" drilled for 130mm bolt pattern.
When I get more funds for the car I want to use the machined 1/2" spacers and longer studs. This will fill in the front wheel well better and allow more camber in the rear. Chris Attached image(s) |
Lo-Fi Version | Time is now: 20th May 2024 - 03:01 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |