 Back to work on the V8 project... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| quadracerx |
 Feb 5 2014, 05:59 PM
Post
#1
|
|
Member  Group: Members Posts: 426 Joined: 3-July 06 From: WA Member No.: 6,366 Region Association: Pacific Northwest  |
Hey Guys...
I'm back to work on the V8 project, finally!! New front A-arm Suspension is in, start of the roll cage has started.... I'm to the point of deciding about some of the rear suspension.... So, here is my basic questions... 1) Id like to use some shorter double adjustable coilovers in place of the long stock units... Has anyone done this in conjunction with additional rear bracing and roll cage supports....? 2) Either that or I buy a coilover conversion setup for the stock rear shocks and still do some reinforcing in the rear suspension area... Once the cage is complete I will begin a thread with lots of pictures... but the progress has been slower than I thought because I am not a fabricator... Thanks for your input in advance... Maybe I should have put this in the road racing section? If so, can one of the admins do it please...? Steve "Go Hawks!! |
   |
 
|
Posts in this topic
quadracerx Back to work on the V8 project... Feb 5 2014, 05:59 PM
quadracerx Is this thing on? Anyone got any advice? Anybody? ... Feb 7 2014, 11:26 AM
bandjoey A. Is snowing cold
B. 4cylinder guys are up and ou... Feb 7 2014, 11:53 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th May 2024 - 06:59 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.