 Exhaust studs - installation of new ones, Is Locktite recommended when putting in new ones? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DRPHIL914 |
 Feb 12 2014, 08:41 AM
Post
#1
|
|
Dr. Phil  Group: Members Posts: 5,767 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States 
 |
recently when i pulled my head exchangers for doing the clutch etc, several exhaust studs pulled out due to the nuts rusting to the studs, So i ordered new ones. I just wanted to make sure when i put the new ones in can i prevent this from happening in the future by using locktite, or is this not advised due to head at this location? if so which kind? AND should anything be applied to the threads before the new copper nuts are put on when the H.E.s are put back in place.
Thanks. |
   |
 
|
Posts in this topic
Philip W. Exhaust studs - installation of new ones Feb 12 2014, 08:41 AM
Mark Henry
recently when i pulled my head exchangers for doi... Feb 12 2014, 08:44 AM SLITS Anti-sieze .......... I use it on installation of ... Feb 12 2014, 09:40 AM Cap'n Krusty
recently when i pulled my head exchangers for doi... Feb 12 2014, 10:15 AM
Philip W.
[quote name='Philip W.' post='1996881' date='Feb ... Feb 12 2014, 11:25 AM Mblizzard I will have to 2nd the Cap'n. I once used loc... Feb 12 2014, 11:00 AM Racer Chris If your question was in regard to securing new stu... Feb 12 2014, 12:35 PM Bartlett 914 No Loctite will help. The temperature is too high.... Feb 12 2014, 04:31 PM Harpo Red Locktite (271) is good for 482 F (250 C) that ... Feb 12 2014, 05:30 PM Jake Raby Yep, I am with the cap'n...
That said, a tric... Feb 12 2014, 10:00 PM HAM Inc Loctite is a waste of time on the ex studs. Nothin... Feb 13 2014, 04:04 PM Philip W.
Loctite is a waste of time on the ex studs. Nothi... Feb 14 2014, 10:45 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th May 2024 - 09:16 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.