![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
Jmkorfha |
![]()
Post
#1
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
Hi Guys, I've been lurking here since last November and have enjoyed all the threads, especially the build threads. I am a retired Mechanic and shop owner . I got started in 1978 restoring VW Beetles. In 1981 I got a 1973 orange 914 rust bucket with a blown engine and a transmission with no first. I completely overhauled the mechanicals but had sagging issues so I got rid of the car but not the dream.
Last November I bought a 1973 Blue 914 from George that was hit light on all 4 corners. Coming are some pics of the before and current work as soon as I figure it out. |
trojanhorsepower |
![]()
Post
#2
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 861 Joined: 21-September 03 From: Marion, NC Member No.: 1,179 Region Association: None ![]() |
(IMG:style_emoticons/default/welcome.png)
We always like progress threads here! And oh yea! (IMG:style_emoticons/default/thisthreadisworthlesswithoutpics.gif) |
Jmkorfha |
![]()
Post
#3
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
Here are some starting pics showing the damage.
![]() ![]() ![]() ![]() 209] ![]() ![]() ![]() =446213] Attached image(s) ![]() ![]() |
trojanhorsepower |
![]()
Post
#4
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 861 Joined: 21-September 03 From: Marion, NC Member No.: 1,179 Region Association: None ![]() |
Wow, that looks like a big job. What is your plan? Might be a good excuse to go with fiberglass quarters.
|
rick 918-S |
![]()
Post
#5
|
Hey nice rack! -Celette ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 20,506 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region ![]() ![]() ![]() |
(IMG:style_emoticons/default/welcome.png) That's the car you had in Florida. Nice to here it made it up to MN. (IMG:style_emoticons/default/aktion035.gif)
I may have parts for you very soon. I have a rear clip at Irv's house in the metro. (914coop) I have a right good right fender too. Some of it may repair nicely though. (IMG:style_emoticons/default/sawzall-smiley.gif) (IMG:style_emoticons/default/smash.gif) |
Jmkorfha |
![]()
Post
#6
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
The previous pics were in Orlando, Fl. I towed the car to Minnesota about 2 weeks ago and have been working on it in my Austin, MN shop.
I spent a lot of time with the mo clamps pulling and working the metal in order to see what panels will need replacing and what can be salvaged. Here is the right front straightened and dolleyed: ![]() ![]() ![]() 222] More pics of the front end, replacement fender piece, and trunk area. ![]() ![]() ![]() 226] ![]() ![]() Attached image(s) ![]() ![]() |
brant |
![]()
Post
#7
|
914 Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 11,641 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains ![]() ![]() ![]() |
Awesome
|
Jmkorfha |
![]()
Post
#8
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
(IMG:style_emoticons/default/welcome.png) That's the car you had in Florida. Nice to here it made it up to MN. (IMG:style_emoticons/default/aktion035.gif) I may have parts for you very soon. I have a rear clip at Irv's house in the metro. (914coop) I have a right good right fender too. Some of it may repair nicely though. (IMG:style_emoticons/default/sawzall-smiley.gif) (IMG:style_emoticons/default/smash.gif) Hi Rick, Thanks for the offer. And the help earlier. I have a left rear 1/4, a right front fender, and a left section. I am a welder/ fabricator and am in the process of welding the left section in this week. I am trying to decide whether to section the right front or to install the complete fender. I will see how the section turns out on the left one. I pulled the rear quarters out by the taillights and they came out nicely. The taillights fit now and the trunk lid gaps are real close. A couple thousand more hours and i may be close. (IMG:style_emoticons/default/welder.gif) |
Jmkorfha |
![]()
Post
#9
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
|
Jmkorfha |
![]()
Post
#10
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
Some more pics
![]() ![]() ![]() ![]() 240] ![]() ![]() ![]() Attached image(s) ![]() |
Qarl |
![]()
Post
#11
|
Shriveled member ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 5,233 Joined: 8-February 03 From: Florida Member No.: 271 Region Association: None ![]() ![]() |
Pretty color and Pedrininis!
Please save it! |
Jmkorfha |
![]()
Post
#12
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
|
Qarl |
![]()
Post
#13
|
Shriveled member ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 5,233 Joined: 8-February 03 From: Florida Member No.: 271 Region Association: None ![]() ![]() |
Let me know when you are back in Orlando! (IMG:style_emoticons/default/smile.gif)
|
Jmkorfha |
![]()
Post
#14
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
Here are some pics of my practice welding. I was a little rusty.
Sort of in order from worst to best. ![]() ![]() ![]() ![]() 258] ![]() ![]() And a butt weld on a piece of fender. ![]() ![]() ![]() The welder I'm using. ![]() Attached image(s) ![]() |
Jmkorfha |
![]()
Post
#15
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
Some pictures of the spot weld cuts, the cutter, and some other tools I'm using.
![]() ![]() ![]() ![]() 269] ![]() Attached image(s) ![]() |
Eric_Shea |
![]()
Post
#16
|
PMB Performance ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 19,279 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains ![]() ![]() |
Niiice.
|
scotty b |
![]()
Post
#17
|
rust free you say ? ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 16,375 Joined: 7-January 05 From: richmond, Va. Member No.: 3,419 Region Association: None ![]() |
Looks like a pretty clean car. Nice find (IMG:style_emoticons/default/smile.gif)
|
Jmkorfha |
![]()
Post
#18
|
I'm not a singing grandpa. ![]() ![]() Group: Members Posts: 59 Joined: 26-October 13 From: Austin, Mn Member No.: 16,569 Region Association: Upper MidWest ![]() |
Will do. |
FourBlades |
![]()
Post
#19
|
From Wreck to Rockin ![]() ![]() ![]() ![]() Group: Members Posts: 2,055 Joined: 3-December 07 From: Brevard, FL Member No.: 8,414 Region Association: South East States ![]() ![]() |
Great work! (IMG:style_emoticons/default/first.gif)
Thanks for saving another one. (IMG:style_emoticons/default/beer3.gif) John |
PanelBilly |
![]()
Post
#20
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,821 Joined: 23-July 06 From: Kent, Wa Member No.: 6,488 Region Association: Pacific Northwest ![]() ![]() |
Keep us posted on the progress (and regress) and welcome to the world
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 17th June 2024 - 09:24 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |