 Great container for shipping trannies |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Qarl |
 Apr 18 2014, 03:24 PM
Post
#1
|
|
Shriveled member  Group: Benefactors Posts: 5,233 Joined: 8-February 03 From: Florida Member No.: 271 Region Association: None   |
No... not transvestites... TRANSMISSIONS...
Costco has these ToughBoxes for $8.99 each. They are 27 gallon size and fit a 901 transmission perfect. Note: Walmart has them too, but they are about $12 to $13 each (if I recall). When I shipped my transmission to Dr. Evil, I actually bought TWO of them and double stacked them. Lined the bottom with layers of cardboard. Placed the tranny on top and then filled in the gaps with more folded cardboard to minimize shifting. Snapped on both lids. THere are already some holes around the long sides. I drilled some extra holes around the short sides through the lips on the bottom and zip tied the boxes and lids closed. Nice and durable and cradles the tranny pretty nicely! (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1397856578.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1397856580.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1397856581.3.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1397856582.4.jpg) |
   |
 
|
Posts in this topic
Qarl Great container for shipping trannies Apr 18 2014, 03:24 PM
bulitt Think hose clamps through the holes would work als... Apr 18 2014, 03:32 PM Qarl Saw these at Walmart too! But they are about ... May 7 2014, 09:08 PM rick 918-S Nice! I built a crate to ship one. It was a PI... May 7 2014, 09:15 PM Cap'n Krusty When I was still in the biz, the ZF guy in San Fra... May 7 2014, 09:55 PM Spoke You could also hose clamp the rear trans mounting ... May 7 2014, 10:10 PM rhodyguy Perfect timing. Thanks :Qarl: . May 8 2014, 09:34 AM Dr Evil All of the suggestions for more stuff past what Qa... May 8 2014, 01:04 PM
Sfreeman615 That's exactly what I shipped my two to Dr. Ev... May 8 2014, 06:47 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st May 2024 - 09:56 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.