WTB: Assorted CV Bolts, 911 and 914/4 |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
We've established the following rules to help make your sales/purchases as successful as possible!
- Please List WTB:, FS:, TRADE: etc (want to buy, for sale, and trade respectively) before your add title.
- You *must* put a price in your ad and state how you would like payment!
- If you'd like to bump your ads, feel free to do so every two days.
- DO NOT MAKE YOUR ADS IN ALL CAPITAL LETTERS! It's considered rude.
- All eBay ads belong in the eBay category.
- Please consolidate your ads into one big lump... listings and pictures together in one thread. Please be considerate of other classified users!!
- Mark your items "SOLD" once you sell them. Please do not ask to have ads removed. Ads will automatically hide themselves after 30 days. We also ask that you leave your pricing in the ads to help others determine fair market value for future sales.
WTB: Assorted CV Bolts, 911 and 914/4 |
gcrotvik |
Jul 14 2014, 10:24 AM
Post
#1
|
Member Group: Members Posts: 360 Joined: 16-December 09 From: Portland Oregon Member No.: 11,134 Region Association: Pacific Northwest |
I am trying to match 3 different sets of 911 and 914/4 CV bolts to go with my plating job.
Set 1: 911 M10 HEX cap (12.9) x 50MM with a 11MM shoulder: I need 2 bolts and 2 backing plates, as shown in the first 3 pictures (KAMAX 12.9). These are for a set of 108MM CV's. Set 2: 914/4 M8 SPLINED cap x 47MM with a 21MM shoulder: Please note the markings on the cap. I am trying to match these markings also. (-INBUS 12.9): I need 3 of these bolts, as shown in pictures 4, 5 and 6. Set 3: 914/4 M8 SPLINED cap x 46MM with a 21MM shoulder: Please note the markings on the cap. I am trying to match these markings also. (KAMAX 12.9): I need 5 of these bolts, as shown in pictures 7, 8 and 9. Attached image(s) |
bdstone914 |
Jul 14 2014, 02:43 PM
Post
#2
|
bdstone914 Group: Members Posts: 4,534 Joined: 8-November 03 From: Riverside CA Member No.: 1,319 |
I am trying to match 3 different sets of 911 and 914/4 CV bolts to go with my plating job. Set 1: 911 M10 HEX cap (12.9) x 50MM with a 11MM shoulder: I need 2 bolts and 2 backing plates, as shown in the first 3 pictures (KAMAX 12.9). These are for a set of 108MM CV's. Set 2: 914/4 M8 SPLINED cap x 47MM with a 21MM shoulder: Please note the markings on the cap. I am trying to match these markings also. (-INBUS 12.9): I need 3 of these bolts, as shown in pictures 4, 5 and 6. Set 3: 914/4 M8 SPLINED cap x 46MM with a 21MM shoulder: Please note the markings on the cap. I am trying to match these markings also. (KAMAX 12.9): I need 5 of these bolts, as shown in pictures 7, 8 and 9. Greg, I have the two 911 backing plates. I have M10 x 50 bolts but the marking are different as they came from BMW's. I have tow of the M8 Inbus bolts Have five of the Kamax bolts. The pattern on the cap is checkered. I think the one in your picture is the same but worm down. |
gcrotvik |
Jul 14 2014, 04:42 PM
Post
#3
|
Member Group: Members Posts: 360 Joined: 16-December 09 From: Portland Oregon Member No.: 11,134 Region Association: Pacific Northwest |
I am trying to match 3 different sets of 911 and 914/4 CV bolts to go with my plating job. Set 1: 911 M10 HEX cap (12.9) x 50MM with a 11MM shoulder: I need 2 bolts and 2 backing plates, as shown in the first 3 pictures (KAMAX 12.9). These are for a set of 108MM CV's. Set 2: 914/4 M8 SPLINED cap x 47MM with a 21MM shoulder: Please note the markings on the cap. I am trying to match these markings also. (-INBUS 12.9): I need 3 of these bolts, as shown in pictures 4, 5 and 6. Set 3: 914/4 M8 SPLINED cap x 46MM with a 21MM shoulder: Please note the markings on the cap. I am trying to match these markings also. (KAMAX 12.9): I need 5 of these bolts, as shown in pictures 7, 8 and 9. Greg, I have the two 911 backing plates. I have M10 x 50 bolts but the marking are different as they came from BMW's. I have tow of the M8 Inbus bolts Have five of the Kamax bolts. The pattern on the cap is checkered. I think the one in your picture is the same but worm down. Hi Bruce, Thank you for checking, I will take what you have. How much do I owe you? Greg |
Lo-Fi Version | Time is now: 4th June 2024 - 04:49 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |