I am trying to match 3 different sets of 911 and 914/4 CV bolts to go with my plating job.

Set 1: 911 M10 HEX cap (12.9) x 50MM with a 11MM shoulder: I need 2 bolts and 2 backing plates, as shown in the first 3 pictures (KAMAX 12.9). These are for a set of 108MM CV's.

Set 2: 914/4 M8 SPLINED cap x 47MM with a 21MM shoulder: Please note the markings on the cap. I am trying to match these markings also. (-INBUS 12.9): I need 3 of these bolts, as shown in pictures 4, 5 and 6.

Set 3: 914/4 M8 SPLINED cap x 46MM with a 21MM shoulder: Please note the markings on the cap. I am trying to match these markings also. (KAMAX 12.9): I need 5 of these bolts, as shown in pictures 7, 8 and 9.

Click to view attachment
Greg,

I have the two 911 backing plates.
I have M10 x 50 bolts but the marking are different as they came from BMW's.
I have tow of the M8 Inbus bolts
Have five of the Kamax bolts. The pattern on the cap is checkered. I think the one in your picture is the same but worm down.

Hi Bruce,

Thank you for checking, I will take what you have. How much do I owe you?

Greg