 5 bolt conversion problem... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| falcor75 |
 Aug 23 2014, 04:17 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,579 Joined: 22-November 12 From: Sweden Member No.: 15,176 Region Association: Scandinavia 
 |
I got a pair of front Boge struts from a '69 911. The kind with a M10x30 bolt that holds the lower joint. I ordered new bearings for them but the inner bearing wont go down all the way.....
http://matsgarage.com/wp-content/uploads/2...08/DSC00912.jpg This is as far as the bearing will go... and I'm kinda clueless as to whats wrong. |
   |
 
|
Posts in this topic
falcor75 5 bolt conversion problem... Aug 23 2014, 04:17 AM
Harpo They are a tight fit. Examine the spindle closely... Aug 23 2014, 06:29 AM falcor75 Axle
Bearing
There's not a huge difference b... Aug 24 2014, 12:06 AM infraredcalvin I have later bilstein struts but there is an inner... Aug 24 2014, 03:25 AM falcor75 Yes the outer bearing is much smaller.... Aug 24 2014, 04:04 AM bulitt Did you search the number off the strut to validat... Aug 24 2014, 08:01 AM falcor75 Sadly I didnt check the nr before I had the strut ... Aug 24 2014, 10:44 PM
jcd914
Sadly I didnt check the nr before I had the strut... Aug 25 2014, 02:10 AM bulitt Pelican tech notes had this-
I did have some pro... Aug 25 2014, 05:04 AM bdstone914 Is the problem with both bearings and both spindle... Aug 25 2014, 08:07 AM falcor75 Problem solved by polishing the spindles with 800 ... Aug 29 2014, 01:41 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 25th May 2024 - 07:09 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.