 oil cooler washers, which goes where? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| cwpeden |
 Aug 23 2014, 05:17 PM
Post
#1
|
|
Great White North, huh?  Group: Members Posts: 916 Joined: 20-August 06 From: Victoria BC Member No.: 6,693 Region Association: Canada  |
So the cooler comes with 2 washers. Thick and thin.
Which one goes where. I've always put the thick one behind the cooler and used silicone to seal. But on this rebuild I didn't use silicone and it leaks. Yes, the surfaces are clean and totally silicone free. I put some grease on it to see how much squash there is on the seal and it was hardly touching. Hmm, thin washer underneath? |
   |
 
|
Posts in this topic
cwpeden oil cooler washers Aug 23 2014, 05:17 PM
cwpeden 10 ft lbs torque?
Bump Aug 23 2014, 06:08 PM colingreene My washers are on the outside,
i took it to 5 ft p... Aug 23 2014, 06:17 PM ClayPerrine There should be no washers between the cooler and ... Aug 23 2014, 07:40 PM
mepstein
There should be no washers between the cooler and... Aug 23 2014, 08:22 PM cwpeden Hmm, PET list 2 washers and I guess I've alway... Aug 23 2014, 07:52 PM cwpeden Hmm, PET list 2 washers and I guess I've alway... Aug 23 2014, 07:54 PM McMark The factory manuals are pretty clear if you look c... Aug 23 2014, 11:41 PM stugray I think most of use look at the PET which is not v... Aug 24 2014, 12:24 AM cwpeden Thanks for the help guys.
Going to start the car ... Aug 26 2014, 12:38 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 08:49 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.