Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

6 Pages V < 1 2 3 4 5 > »   
Reply to this topicStart new topic
> LED headlights, LED head lights
FourBlades
post Oct 28 2014, 09:14 PM
Post #41


From Wreck to Rockin
****

Group: Members
Posts: 2,052
Joined: 3-December 07
From: Brevard, FL
Member No.: 8,414
Region Association: South East States




The only thing you have to watch is the plug on the bulb can get jammed between the back of the bulb and the back of the headlight bucket when the light goes down.

The plug is on a wire about 6 inches long, the stock bulbs have the plug directly on the back of the light.

Make sure to secure this wire and plug where it won't get in the way.

I have manually operated headlights (I.e. took out the headlight pop up motors) so I can just move it aside when putting the lights down.

If you have the motors I don't know what will happen if it the plug gets in the way of them closing???

John
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Chris914n6
post Oct 28 2014, 10:12 PM
Post #42


Jackstands are my life.
****

Group: Members
Posts: 3,287
Joined: 14-March 03
From: Las Vegas, NV
Member No.: 431
Region Association: Southwest Region



If I did my calculations right, that GE LED is twice as bright as a 35w HID. That's insane.

It also should get super hot. I'd look into it as cutting some air vents in the surround might be in order.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Oct 29 2014, 05:09 AM
Post #43


914-6 GT in waiting
***************

Group: Members
Posts: 19,142
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region



QUOTE(Chris914n6 @ Oct 29 2014, 12:12 AM) *

If I did my calculations right, that GE LED is twice as bright as a 35w HID. That's insane.

It also should get super hot. I'd look into it as cutting some air vents in the surround might be in order.

Why would it get super hot? Draws less current and led run cool. I put my hand on the bulb after a couple minutes and felt no heat at all. I'll run them on my way to work today and check again.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sfrenck
post Oct 29 2014, 05:42 AM
Post #44


Member
**

Group: Members
Posts: 492
Joined: 28-February 10
From: Wilmington, DE
Member No.: 11,411
Region Association: MidAtlantic Region



QUOTE(mepstein @ Oct 28 2014, 10:20 PM) *


...They do look a bit odd since the low beam only lights up the top half of the bulb and they stick out about 1/2" from the trim ring. They fit fine but unlike our hidden lights...



Mark (or anyone else that installed these) - can you post a pic of the installed lamp in daylight so I can understand how they stick out?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
gryphon68
post Oct 29 2014, 05:50 AM
Post #45


Member
**

Group: Members
Posts: 61
Joined: 2-October 13
From: SE Michigan
Member No.: 16,462
Region Association: Upper MidWest



QUOTE(sfrenck @ Oct 29 2014, 07:42 AM) *

QUOTE(mepstein @ Oct 28 2014, 10:20 PM) *


...They do look a bit odd since the low beam only lights up the top half of the bulb and they stick out about 1/2" from the trim ring. They fit fine but unlike our hidden lights...



Mark (or anyone else that installed these) - can you post a pic of the installed lamp in daylight so I can understand how they stick out?


The fact that the front lens does seem to extend forward from the trim ring was the primary concern I had with these. Not really from an appearance stand point, just was hoping to hear that they fit and retract properly with the 914 pop-up mechanism.

As far as the heat, yes, these likely get quite warm, but I think you will find the rear of the housing is metal (presumably aluminum) and acts as a huge heat sink to dissipate the thermal energy.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Oct 29 2014, 06:05 AM
Post #46


914-6 GT in waiting
***************

Group: Members
Posts: 19,142
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region



Looks different but fits fine. There's plenty of clearance for the bulb.


Attached thumbnail(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Jetsetsurfshop
post Oct 29 2014, 06:12 AM
Post #47


Senior Member
***

Group: Members
Posts: 814
Joined: 7-April 11
From: Marco Island Florida
Member No.: 12,907
Region Association: South East States



QUOTE(FourBlades @ Oct 28 2014, 06:38 PM) *

Got mine today too:

Side by side front view does not really show much:



The little orange dot on the left is a 55 watt halogen H4. All the rest of the light is from one LED GE Nighthawk.



They look very cool.



Really dramatic improvement in lighting. Just floods the street with light but cuts off totally above waist level.



Really makes it fun to drive at night. I avoided it before. You can also see the killer LED gauges Tim (Timothy_ND28) built for me.

John


Hey John,
Are they as bright as George's set up? What about the housing? Did they not fit? They look really sweet!
Shane
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
ThePaintedMan
post Oct 29 2014, 07:10 AM
Post #48


Advanced Member
****

Group: Members
Posts: 3,885
Joined: 6-September 11
From: St. Petersburg, FL
Member No.: 13,527
Region Association: South East States



Pretty much makes my HIDs pointless now... (IMG:style_emoticons/default/headbang.gif) I knew I should have gone with LEDs. I guess I could always just move the HIDs to the Miata, but I'll have to trash my fiberglass covers that I made. Live and learn.

Thanks for posting the pics John! Looks great.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Oct 29 2014, 07:36 AM
Post #49


914-6 GT in waiting
***************

Group: Members
Posts: 19,142
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region



20 minutes of driving and the bulb and trim ring are cool to the touch. I don't know about the alum housing but the plastic headlight souround is cool as well. Like I said, I'm very pleased with the lights and will get some more driving time when I leave work at 7pm tonight.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Krieger
post Oct 29 2014, 07:54 AM
Post #50


Advanced Member
****

Group: Members
Posts: 4,686
Joined: 24-May 04
From: Santa Rosa CA
Member No.: 2,104
Region Association: None



Yea! I have been waiting for a solution. I hope this is it.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Oct 29 2014, 09:22 AM
Post #51


914-6 GT in waiting
***************

Group: Members
Posts: 19,142
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region



One reason I bought on Amazon is their reurn policy. If this turned out to be less than I expected, they would go back. Right now, I have no thoughts about returning them. They have met all my expectations.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
StratPlayer
post Oct 29 2014, 09:41 AM
Post #52


StratPlayer
****

Group: Members
Posts: 3,261
Joined: 27-December 02
From: SLC, Utah
Member No.: 27
Region Association: Rocky Mountains



Those will be my next upgrade.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
FourBlades
post Oct 29 2014, 11:14 AM
Post #53


From Wreck to Rockin
****

Group: Members
Posts: 2,052
Joined: 3-December 07
From: Brevard, FL
Member No.: 8,414
Region Association: South East States



I think the hids George installed are about as bright. I think the hids throw a more even light pattern. There are some brighter and dimmer areas with the led that the hids don't have.

The leds are awesome because they are a 15 minute install with no modifications. The super sharp cut off is also very cool.

John
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JmuRiz
post Oct 29 2014, 12:40 PM
Post #54


914 Guru
*****

Group: Members
Posts: 5,414
Joined: 30-December 02
From: NoVA
Member No.: 50
Region Association: MidAtlantic Region



Very neat upgrade, I have 65w H4s in my car, but may think about these...especially when/if I get my car done and want to drive it to events that last to the evening.

Anyone have a volt-meter in their car...if so, how is the volt drop with these headlights vs standard?

Thanks,
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Chris914n6
post Oct 29 2014, 04:01 PM
Post #55


Jackstands are my life.
****

Group: Members
Posts: 3,287
Joined: 14-March 03
From: Las Vegas, NV
Member No.: 431
Region Association: Southwest Region



QUOTE(mepstein @ Oct 29 2014, 04:09 AM) *

QUOTE(Chris914n6 @ Oct 29 2014, 12:12 AM) *

If I did my calculations right, that GE LED is twice as bright as a 35w HID. That's insane.

It also should get super hot. I'd look into it as cutting some air vents in the surround might be in order.

Why would it get super hot? Draws less current and led run cool. I put my hand on the bulb after a couple minutes and felt no heat at all. I'll run them on my way to work today and check again.


LEDs at this level get hot. From the pics it looks like the whole rear housing is a ribbed heatsink. The majority of vehicles using this style headlamp are front engine so will have turbulent air behind the unit. The 914 is relatively enclosed. Might not be a problem but it should be looked into just in case. Heat kills electronics.
Even 60w equivalent house light bulbs have built in heatsinks.
Testing during the day will give you a better idea of heat buildup during summer nights.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Chris914n6
post Oct 29 2014, 04:16 PM
Post #56


Jackstands are my life.
****

Group: Members
Posts: 3,287
Joined: 14-March 03
From: Las Vegas, NV
Member No.: 431
Region Association: Southwest Region



QUOTE(JmuRiz @ Oct 29 2014, 11:40 AM) *

Anyone have a volt-meter in their car...if so, how is the volt drop with these headlights vs standard?


Amazon...
Q: How much power do these draw on High? on Low?
A: According to ge tech specks... The lights draw 1.8 amps on low beam and 3.6 amps on high beams.


I might have used the wrong formula... (IMG:style_emoticons/default/type.gif) (IMG:style_emoticons/default/dry.gif)

GElighting website...
How many Watts are these (LED Headlamps)?

The GE LED Headlamps produces a similar amount of light to 55 watt halogen product however, because LEDs are more efficient, the LED Headlamp uses less power.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sfrenck
post Oct 31 2014, 08:31 AM
Post #57


Member
**

Group: Members
Posts: 492
Joined: 28-February 10
From: Wilmington, DE
Member No.: 11,411
Region Association: MidAtlantic Region



Is there a silver band with "GE" across the middle of these or not? I see pics both ways:

From Grassroots Motorsports (on a Miata.... sorry):

Attached Image

Grassroots Nighthawk review

From Amazon:

Attached Image

No silver band seems much more presentable to me.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Harpo
post Oct 31 2014, 09:28 AM
Post #58


Senior Member
***

Group: Members
Posts: 1,304
Joined: 21-August 11
From: Motor City aka Detroit
Member No.: 13,469
Region Association: None



The ones without the GE might be trucklites
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Oct 31 2014, 10:38 AM
Post #59


914-6 GT in waiting
***************

Group: Members
Posts: 19,142
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region



Might matter to me on a 911. On my 14, the lights are either on or down.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sfrenck
post Oct 31 2014, 10:49 AM
Post #60


Member
**

Group: Members
Posts: 492
Joined: 28-February 10
From: Wilmington, DE
Member No.: 11,411
Region Association: MidAtlantic Region



QUOTE(mepstein @ Oct 31 2014, 12:38 PM) *

Might matter to me on a 911. On my 14, the lights are either on or down.


So yours have the bands?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

6 Pages V < 1 2 3 4 5 > » 
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 29th March 2024 - 12:00 AM