Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> I found the rust!, : ) suggestions?
914Next
post Jan 21 2015, 09:09 AM
Post #1


Senior Member
***

Group: Members
Posts: 699
Joined: 28-July 14
From: Ephraim Wisconsin
Member No.: 17,695
Region Association: Upper MidWest



This is the extent of the rust that I have found on the car so far....and I have looked quite hard. Have not removed the rockers because they are still held on with the original rivets. I did loosen the bottom screws, however and bang on the rockers knocking quite a bit of dust out...not rust or scale. Then I used a scope to go in through the rear wheel well to see what lurked behind the rocker. Looks very clean...dirty and a bit of what may be some slight surface rust but red painted surface in most areas I can observe.

So...what should I do, if anything about the rust in the pics? I will say the car will not be getting wet so I'm tempted to leave as is. Trying to keep the car as is to the extent possible. Can I safely leave these spots or do I need to repair. If repair? What is the best way to do it? Thanks.

Wow. Thanks for the guidance on the posts, guys. Simple once you know how. I added a few additional pics of the jack post areas. I'll continue to contemplate taking the rockers off but given what I see, I'm more likely to leave them as is. Not concerned about rust underneath. May even take a video and post what I see in there with the scope.

Attached Image Attached Image Attached Image Attached ImageAttached Image Attached Image


Attached thumbnail(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
914Next   I found the rust!   Jan 21 2015, 09:09 AM
stevegm   This is the extent of the rust that I have found ...   Jan 21 2015, 09:15 AM
914Next   This is the extent of the rust that I have found...   Jan 21 2015, 09:19 AM
stevegm   [quote name='stevegm' post='2136686' date='Jan 21...   Jan 21 2015, 09:58 AM
76-914   Click on the "Help" button, upper right ...   Jan 21 2015, 09:34 AM
bandjoey   Click on full edit of your post. Bottom left side ...   Jan 21 2015, 09:39 AM
Dave_Darling   Here's the how-to: http://www.914world.com/bb...   Jan 21 2015, 09:40 AM
stevegm   The pictures look promising. Fairly clean. But the...   Jan 21 2015, 11:17 AM
914Next   The pictures look promising. Fairly clean. But th...   Jan 21 2015, 11:22 AM
Tom_T   The pictures look promising. Fairly clean. But t...   Jan 21 2015, 11:41 AM
914Next   [quote name='914Next' post='2136738' date='Jan 21...   Jan 21 2015, 12:11 PM
Tom_T   Back to rust - Before you take off the rockers -...   Jan 21 2015, 11:22 AM
brant   Pull the rockers It's a part of the required ...   Jan 21 2015, 12:30 PM
Dave_Darling   :agree: At the very least, remove the screws on ...   Jan 21 2015, 01:57 PM
914Next   :agree: At the very least, remove the screws on...   Jan 21 2015, 02:24 PM
brettrarnold   :agree: At the very least, remove the screws on...   Sep 14 2015, 11:35 AM
brant   pull them anyways. you can buy rivets I tell ever...   Jan 21 2015, 06:12 PM
Garold Shaffer   pull them anyways. you can buy rivets I tell eve...   Jan 21 2015, 06:55 PM
stevegm   pull them anyways. you can buy rivets I tell ev...   Jan 21 2015, 07:08 PM
1972 914 2.0   Even though you probably already have, make sure t...   Jan 21 2015, 06:49 PM
boxsterfan   The rust spot in the door jam area (first pic) is ...   Jan 21 2015, 07:15 PM
914Next   The rust spot in the door jam area (first pic) is...   Jan 21 2015, 07:37 PM
PanelBilly   The rust spot in the door jam area (first pic) is...   Jan 21 2015, 08:03 PM
914Next   The rust spot in the door jam area (first pic) i...   Jan 21 2015, 08:19 PM
Larmo63   I would pull the rocker covers too. There are plen...   Jan 21 2015, 07:48 PM
914Next   I would pull the rocker covers too. There are ple...   Jan 21 2015, 07:59 PM
stevegm   I would pull the rocker covers too. There are pl...   Jan 21 2015, 08:13 PM
914Next   [quote name='914Next' post='2136923' date='Jan 21...   Jan 21 2015, 08:36 PM
stevegm   [quote name='914Next' post='2136923' date='Jan 2...   Jan 21 2015, 08:50 PM
914Next   [quote name='914Next' post='2136937' date='Jan 21...   Jan 21 2015, 09:06 PM
stevegm   Duplicate post.   Jan 21 2015, 08:14 PM
stevegm   Duplicate post.   Jan 21 2015, 08:14 PM
boxsterfan   If the bottom 3 screws came out on both rockers, t...   Jan 21 2015, 09:46 PM
astronomerdave   Wow, I just read this thread with great interest. ...   Sep 10 2015, 01:15 PM
astronomerdave   Anyway, I've not done it before but if I pull...   Sep 10 2015, 01:32 PM
76-914   [quote name='astronomerdave' post='2235430' date=...   Sep 14 2015, 05:43 PM
914Next   Wow, I just read this thread with great interest....   Sep 10 2015, 04:10 PM
r_towle   Wow, I just read this thread with great interest...   Sep 10 2015, 06:46 PM
billh1963   Rust is a good reason and you do have it under t...   Sep 10 2015, 08:00 PM
914Next   [quote name='914Next' post='2235511' date='Sep 10...   Sep 10 2015, 08:36 PM
zambezi   Hopefully not.   Sep 10 2015, 01:32 PM
zambezi   to access the heater duct you must cut open the lo...   Sep 10 2015, 01:33 PM
boxsterfan   How's your channels under the front hood (take...   Sep 10 2015, 06:39 PM
914Next   How's your channels under the front hood (tak...   Sep 10 2015, 08:46 PM
Ferg   So how will you address the rust without removal o...   Sep 10 2015, 08:42 PM
914Next   So how will you address the rust without removal ...   Sep 10 2015, 08:54 PM
r_towle   Good luck, enjoy your car. The next owner will be ...   Sep 10 2015, 08:55 PM
914Next   Good luck, enjoy your car. The next owner will be...   Sep 10 2015, 08:57 PM
r_towle   Good luck, enjoy your car. The next owner will b...   Sep 10 2015, 08:59 PM
914Next   [quote name='914Next' post='2235705' date='Sep 10...   Sep 10 2015, 09:10 PM
boxsterfan   [quote name='r_towle' post='2235708' date='Sep 10...   Sep 10 2015, 09:25 PM
914Next   [quote name='914Next' post='2235714' date='Sep 10...   Sep 11 2015, 12:41 AM
zambezi   Why not just undo the bottom screws and flex the c...   Sep 10 2015, 09:17 PM
914Next   Why not just undo the bottom screws and flex the ...   Sep 11 2015, 12:45 AM
Jeffs9146   :sawzall: :welder: Do not try and patch that...   Sep 14 2015, 11:47 AM
brettrarnold   :sawzall: :welder: Do not try and patch that...   Sep 14 2015, 12:04 PM
boxsterfan   [quote name='Jeffs9146' post='2237218' date='Sep ...   Sep 14 2015, 12:56 PM
brettrarnold   [quote name='Jeffs9146' post='2237218' date='Sep...   Sep 14 2015, 02:12 PM
cary   You have to cut it back until you get to GOOD so...   Sep 15 2015, 08:39 AM
Dave_Darling   Brace the door openings, because it's way too ...   Sep 14 2015, 04:44 PM
Claus Graf   Be afraid, be very afraid of what is underneath......   Sep 15 2015, 10:53 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 20th May 2024 - 05:39 AM