 Need Raby 9590 cam info |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Frank S |
 May 6 2015, 04:53 AM
Post
#1
|
|
Member  Group: Members Posts: 135 Joined: 15-April 15 From: Wiesbaden, Germany Member No.: 18,632 Region Association: Germany 
 |
Hi there,
I'm about to order parts for my engine rebuild. The plan is to upgrade a 2.0 GA D-Jet engine as following: 2056cc Stroke 71mm (stock) CR 9:1 Raby 9590 cam SSI Heatexchangers Original Muffler The only thing stoping me right now is that I need verify CO2 emissions every 2 years here in Germany. My questions are now: 1. Does this set up idle well and stable at 900-950RPM 2. Does it reach the 3% CO2 spec. in idle I know that a none stock cam should not idle so low, this will be just for the time of the measurement. Without reaching this spec values I not able to register the car here in Germany :-( Thanks and best Regards, Frank |
   |
 
|
Posts in this topic
Frank S Need Raby 9590 cam info May 6 2015, 04:53 AM
RobW PM Jake Raby. He's the guy who made the cam. May 6 2015, 07:42 AM Java2570 Also, contact Type 4 store and see if they have an... May 6 2015, 08:20 AM toon1 My 9550 cam idles good at 900-950 rpm.
My AFR at... May 6 2015, 08:29 AM Frank S Hi guys,
thanks for your input!
Anybody else ... May 6 2015, 03:46 PM Jake Raby Idle speed of 1,000 is where I optimized the 9550.... May 6 2015, 09:08 PM
Frank S
Idle speed of 1,000 is where I optimized the 9550... May 7 2015, 01:58 AM
toon1
Idle speed of 1,000 is where I optimized the 9550... May 7 2015, 01:52 PM Dave_Darling The only 914s that require testing in CA any more ... May 6 2015, 11:13 PM SirAndy
The only 914s that require testing in CA any more... May 7 2015, 12:50 AM worn
The only 914s that require testing in CA any mor... May 7 2015, 07:33 PM Dave_Darling
You mean that the poster is being tested in Germa... May 8 2015, 10:02 AM SirAndy No, I mean that the CA guys don't actually hav... May 8 2015, 10:19 AM euro911 Not sure how different the profile is on the 9590 ... May 7 2015, 03:54 AM Porschef Likewise, for about the last four years. I'd b... May 7 2015, 03:38 PM toon1
Likewise, for about the last four years. I'd ... May 7 2015, 05:49 PM worn
Likewise, for about the last four years. I'd ... May 7 2015, 07:40 PM toon1
Likewise, for about the last four years. I'd... May 7 2015, 09:31 PM Frank S [/quote]
I have the cam and compression numbers of... May 8 2015, 06:24 AM Porschef Ahh, ok. Yes, that would be too high at idle. I... May 7 2015, 06:25 PM euro911 European Motor Works will get you any cam profile ... May 7 2015, 07:54 PM Bleyseng Happier with a stock cam, no. A stock cam engine g... May 8 2015, 07:28 AM Frank S
Happier with a stock cam, no. A stock cam engine ... May 8 2015, 08:40 AM Highland To get the recommended 14 degrees BTDC at idle is ... Oct 27 2015, 12:03 AM Jake Raby
To get the recommended 14 degrees BTDC at idle is... Oct 27 2015, 08:18 AM euro911 I'm sure there are some really knowledgeable g... Oct 27 2015, 02:04 AM toon1
To get the recommended 14 degrees BTDC at idle i... Oct 27 2015, 09:22 AM Highland Can someone tell me the solution to limiting the a... Oct 27 2015, 10:59 AM Highland Is everyone else running a programmable ignition c... Oct 27 2015, 05:29 PM Jake Raby
Is everyone else running a programmable ignition ... Oct 28 2015, 10:31 PM 914_teener The type IV Store does not offer the 9550.
Am I m... Oct 29 2015, 05:16 PM toon1
The type IV Store does not offer the 9550.
Am I ... Oct 29 2015, 09:38 PM Jake Raby
The type IV Store does not offer the 9550.
Am I... Oct 30 2015, 08:06 AM toon1
[quote name='toon1' post='2258629' date='Oct 29 2... Oct 30 2015, 08:31 AM The Cabinetmaker The 9550 is an earlier version of the 9590. Oct 29 2015, 05:50 PM 914werke Now THAT'S useful information. Oct 30 2015, 08:39 AM toon1
Now THAT'S useful information.
I'm ru... Oct 30 2015, 08:52 AM 914_teener
Now THAT'S useful information.
I'm r... Oct 30 2015, 09:10 AM toon1 The cam ( IIRC) was designed for stock FI.
If ... Oct 30 2015, 10:06 AM Frank S I've ordered all the parts I need for the rebu... Oct 30 2015, 12:28 PM toon1
I've ordered all the parts I need for the reb... Oct 30 2015, 03:36 PM 914_teener
I've ordered all the parts I need for the re... Oct 30 2015, 04:43 PM Jake Raby For sea level operation the 9550 and 9590 should b... Oct 30 2015, 05:18 PM 914_teener
For sea level operation the 9550 and 9590 should ... Oct 30 2015, 08:15 PM toon1
For sea level operation the 9550 and 9590 should ... Oct 30 2015, 08:20 PM Frank S Thanks Jake,
that was the last piece of info neede... Nov 2 2015, 12:18 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th May 2024 - 12:05 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.