1974 914-4 2.0, Tackling the rust |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
1974 914-4 2.0, Tackling the rust |
Nemisus |
May 25 2015, 03:53 PM
Post
#1
|
Member Group: Members Posts: 82 Joined: 1-October 11 From: North Bay CA Member No.: 13,631 Region Association: Northern California |
Now that I have the 2.0 running adequately its time to tackle the rust issues...
When I first looked this car over I was so excited about getting it I didn't look as thoroughly as I should have. The cost of excitement I suppose... Although what I am about to show you isn't nearly as bad as some of the amazing restorations I have seen on this site, I still feel it is necessary to show you what I am dealing with! My hopes are that I can be pointed in the right direction. I am partially embarrassed to even show these pictures as the rot is minimal by comparison to what I've seen some members work with... here goes nothing... all the interior removed: (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590830.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590831.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590831.3.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590831.4.jpg) seat mount is completely gone: (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590832.5.jpg) Just behind the passenger seat... directly over the jack mount area: (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590832.6.jpg) Same area as from the previous pictures only look from under: (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432591623.1.jpg) nearly completely separated from the top of the tunnel: (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590832.7.jpg) Nemi |
Nemisus |
May 25 2015, 03:54 PM
Post
#2
|
Member Group: Members Posts: 82 Joined: 1-October 11 From: North Bay CA Member No.: 13,631 Region Association: Northern California |
Under the car looking towards the front: Tunnel is in rough shape
(IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590844.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590844.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i98.photobucket.com-13631-1432590845.3.jpg) This gives a basic of what I'm dealing with. Oddly, there is No rust in the "hell hole"... at least none that I can clearly see. The battery moved to the rear of the car and that might have saved this area... Anyhow, this is what I have to work with. Overall not terrible, but certainly more than I had hoped for in wanting a drive-able project. Comments welcome. Thanks in advance! Cheers |
Dave_Darling |
May 25 2015, 08:21 PM
Post
#3
|
914 Idiot Group: Members Posts: 14,986 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California |
|
Lo-Fi Version | Time is now: 17th May 2024 - 06:30 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |