 Oil cooler, Installing |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| cpavlenko |
 Jul 23 2015, 09:58 PM
Post
#1
|
|
Member  Group: Members Posts: 489 Joined: 19-April 12 From: North Arizona Member No.: 14,400 Region Association: Southwest Region  |
Hi all, well, I'm going to put a oil cooler in the stock 1.7. I'm going with a 12"×9"×4" deep fan cooled oil cooler. Going to put it on the passenger side by the trans. I'm doing this cause the 914 has been running hot in the summer time. Been running at 230 to 240 after a good ride in this heat, around 98 degrees. Should this help. My stock cooler is in good shape and clean. Been freshly tuned also. I'm hoping it'll bring down the temps. Timing is is correct and fuel pressure is good. Engine is a stock 1.7 FI. Sooooo, what u all think about this.
|
   |
 
|
Posts in this topic
cpavlenko Oil cooler Jul 23 2015, 09:58 PM
Elliot Cannon You might want to determine if it is truly running... Jul 24 2015, 12:18 AM
rfinegan
You might want to determine if it is truly runnin... Jul 24 2015, 04:57 AM cpavlenko i'm using a dip stick gauge, and it reads corr... Jul 24 2015, 07:15 AM RobW Hows your timing and valves? Jul 24 2015, 07:41 AM cpavlenko
Hows your timing and valves?
timing is right, an... Jul 24 2015, 11:13 AM Dave_Darling Putting the cooler there is not optimal--it will l... Jul 24 2015, 09:04 AM cpavlenko
Putting the cooler there is not optimal--it will ... Jul 24 2015, 11:18 AM patssle
I have a similar setup on my car, with a fan. Wi... Jul 24 2015, 04:20 PM boxsterfan Do you remove the stock oil cooler? This seems li... Jul 24 2015, 12:46 PM cpavlenko
Do you remove the stock oil cooler? This seems l... Jul 24 2015, 02:43 PM ThePaintedMan You've pulled the tin and cleaned the oil cool... Jul 24 2015, 02:09 PM Jetsetsurfshop
You've pulled the tin and cleaned the oil coo... Jul 24 2015, 04:50 PM ThePaintedMan
As far as you know.... :evilgrin:
Shane, would... Jul 24 2015, 05:57 PM campbellcj FWIW on a previous 914 I did the small rear-mounte... Jul 24 2015, 10:09 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th May 2024 - 06:22 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.