 Pushrod Tube seals, viton seals |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Alphaogre |
 Jul 28 2015, 11:51 AM
Post
#1
|
|
Member  Group: Members Posts: 460 Joined: 28-May 12 From: San Diego Member No.: 14,487 Region Association: Southern California  |
Has anyone used these viton seals before on the pushrod tubes and valve covers? I would be curious if they would help with the leaking or not?
http://www.autoatlanta.com/Porsche-914-Vit...l-Kit-srch.html Pushrod Tube Seal Kit Who wants to constantly perform the dirty, greasy pushrod tube replacement procedure when these space age viton seals eliminate the problem for years! rated at 450. Degrees, if installed properly you should never have to replace the seals again! Kit comes complete with precise instructions and valve cover gaskets. Everything you need except hand cleaner! Consists of: 8 b021 109 345 a; 2 r021 101 481; 1 rtc 1022 make sure that you readjust the valves and check the valve adjuster lugs for damage. Kit consists of: 8 - b021109349b - pushrod tube seal, large - normally $20.00 8 - b021109345a - pushrod tube seal viton - normally $8.00 2 - r021101481 - valve cover gasket - normally $2.40 1 - btc1022...(choose a part on the right to read more)  |
   |
 
|
  |
Replies
| Elliot Cannon |
Jul 29 2015, 10:49 AM
Post
#2
|
|
914 Guru Group: Retired Members Posts: 8,487 Joined: 29-December 06 From: Paso Robles Ca. (Central coast) Member No.: 7,407 Region Association: None 
|
Used by FAT Performance, European Motor Works and the California Central Coast School of High Tech Stuff. But (IMG:style_emoticons/default/WTF.gif) do they know? (IMG:style_emoticons/default/av-943.gif)
Attached image(s) 
|
|
|
|
| Alphaogre |
Jul 29 2015, 12:05 PM
Post
#3
|
|
Member Group: Members Posts: 460 Joined: 28-May 12 From: San Diego Member No.: 14,487 Region Association: Southern California |
QUOTE(Elliot Cannon @ Jul 29 2015, 09:49 AM)  Used by FAT Performance, European Motor Works and the California Central Coast School of High Tech Stuff. But (IMG:style_emoticons/default/WTF.gif) do they know? (IMG:style_emoticons/default/av-943.gif) Thats interesting, is that the Locktite pipe sealant in the photo? |
|
|
|
| 914_teener |
Jul 29 2015, 06:46 PM
Post
#4
|
|
914 Guru Group: Members Posts: 5,198 Joined: 31-August 08 From: So. Cal Member No.: 9,489 Region Association: Southern California |
e='Jul 29 2015, 11:05 AM' post='2216313']
[quote name='Elliot Cannon' post='2216285' date='Jul 29 2015, 09:49 AM'] Used by FAT Performance, European Motor Works and the California Central Coast School of High Tech Stuff. But (IMG:style_emoticons/default/WTF.gif) do they know? (IMG:style_emoticons/default/av-943.gif) [/quote] Thats interesting, is that the Locktite pipe sealant in the photo? [/quote] Ignore that photo ........... It is infamous here and will lead you down the yellow brick road to be attacked by flying monkies (IMG:style_emoticons/default/laugh.gif) (IMG:style_emoticons/default/stirthepot.gif) |
|
|
|
| pcdarks |
Jan 22 2021, 03:51 PM
Post
#5
|
|
Member Group: Members Posts: 80 Joined: 22-June 13 Member No.: 16,037 Region Association: None |
Thats interesting, is that the Locktite pipe sealant in the photo?
[/quote] Ignore that photo ........... It is infamous here and will lead you down the yellow brick road to be attacked by flying monkies (IMG:style_emoticons/default/laugh.gif) (IMG:style_emoticons/default/stirthepot.gif) [/quote] So then what is the orange stuff in the picture? |
|
|
|
| Dave_Darling |
Jan 23 2021, 10:02 PM
Post
#6
|
|
914 Idiot Group: Members Posts: 14,986 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California
|
QUOTE(pcdarks @ Jan 22 2021, 01:51 PM) So then what is the orange stuff in the picture? Orange RTV. Generally not the right stuff to use for O-rings. Elliott, however, is quite proud that a Professional Shop ™ used it on the outboard rings on his motor. --DD |
|
|
|
Posts in this topic
Alphaogre Pushrod Tube seals Jul 28 2015, 11:51 AM
saigon71 I use the good old cork gaskets on the valve cover... Jul 28 2015, 12:25 PM
Philip W.
I use the good old cork gaskets on the valve cove... Jul 28 2015, 12:33 PM Dave_Darling Cork gaskets, viton o-rings. If you have an early... Jul 28 2015, 02:04 PM ThePaintedMan Dave nailed it. You indeed do not have to pull the... Jul 28 2015, 02:31 PM McMark I just get them from McMaster-Carr
Small Viton Or... Jul 28 2015, 02:40 PM Alphaogre
The short version of the instructions: Pull the... Jul 28 2015, 05:09 PM The Cabinetmaker Cork valve cover gaskets. Period! Use permatex... Jul 28 2015, 05:18 PM Highland Alphaogre, since you have to order 25 at a time fr... Jul 28 2015, 05:26 PM Alphaogre
Alphaogre, since you have to order 25 at a time f... Jul 29 2015, 11:57 AM 914forme I used Loctite pipe sealant on the O-rings, they n... Jul 28 2015, 06:04 PM Mark Henry
Used by FAT Performance, European Motor Works an... Jul 29 2015, 12:21 PM AZBanks
[quote name='Alphaogre' post='2216313' date='Jul ... Jan 23 2021, 12:52 PM bbrock
Do you have a supplier and part number on the DOW... Jan 23 2021, 03:43 PM AZBanks
Do you have a supplier and part number on the DO... Jan 23 2021, 04:32 PM Mikey914 Cork or silicone. I make both. Personally I like t... Jul 29 2015, 10:57 AM Dave_Darling
Selling point on the silicone is they are reusabl... Jul 29 2015, 05:47 PM rjames
I've reused the cork valve cover gaskets at ... Jan 22 2021, 05:30 PM dr914@autoatlanta.com yes and once we install them no one ever returns f... Jan 22 2021, 04:37 PM AZBanks @McMark
Did you ever try out the X-shape rings? Jan 23 2021, 12:46 PM DRPHIL914
[b]@[url=http://www.914world.com/bbs2/index.php?s... Jan 23 2021, 04:14 PM AZBanks Are the o-rings the same size for 1.7 and 1.8 lite... Jan 23 2021, 04:23 PM mark04usa
Are the o-rings the same size for 1.7 and 1.8 lit... Jan 23 2021, 05:17 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 11:21 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.