 FS 1974 2.0 Project, $3700 (located in Canada) |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| mihai914 |
 Aug 3 2015, 08:34 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 800 Joined: 2-March 05 From: Montreal, QC Member No.: 3,697 Region Association: None 
 |
1974 Porsche 914 4 cyl. 2.0 engine. Around 65K original miles (supporting maintenance invoices from previous owners). The car is completely original (has not been registered for almost 25 years) and I haven't touched it in ten!
The body needs a complete restoration, floor pans are solid but some patches are required at the rear corners, battery tray is good. Almost no bondo. Hell hole will need attention and suspension console should also be done. Longs were started 10 years ago: http://www.914world.com/bbs2/index.php?sho...'s+progress Car had the front right fender replaced and seems to have had light damage to the front left headlight bucket area. Half of the car still has original paint. Engine works very well with original fuel injection (can be road tested because it's in my other 914) and stainless steel heat exchangers. Transmission works well but you have to be gentle to the first gear. Interior is in good conditon (seats not torn, dash not cracked, center console). No electrical wire hacking. Original 2.0 alloy wheels, the tires will need replacement. Car is complete, but I have plenty of other parts if ever needed. More pictures to come if needed. PS: Original bumpers were black and are available.  |
   |
 
|
| mihai914 |
Aug 3 2015, 08:38 PM
Post
#2
|
|
Senior Member Group: Members Posts: 800 Joined: 2-March 05 From: Montreal, QC Member No.: 3,697 Region Association: None
|
Other picture
  |
|
|
|
| mihai914 |
Aug 3 2015, 08:40 PM
Post
#3
|
|
Senior Member Group: Members Posts: 800 Joined: 2-March 05 From: Montreal, QC Member No.: 3,697 Region Association: None
|
  |
|
|
|
| mihai914 |
Aug 3 2015, 08:42 PM
Post
#4
|
|
Senior Member Group: Members Posts: 800 Joined: 2-March 05 From: Montreal, QC Member No.: 3,697 Region Association: None
|
  |
|
|
|
| mihai914 |
Aug 3 2015, 08:43 PM
Post
#5
|
|
Senior Member Group: Members Posts: 800 Joined: 2-March 05 From: Montreal, QC Member No.: 3,697 Region Association: None
|
Last two picture for now.
  |
|
|
|
| mihai914 |
Aug 5 2015, 05:28 AM
Post
#6
|
|
Senior Member Group: Members Posts: 800 Joined: 2-March 05 From: Montreal, QC Member No.: 3,697 Region Association: None
|
Here is a picture of the motor as installed in the other car so it can be tested.
The car has has all the parts it came with, it was not harvested, everything is stock. The engine will come with the FI and the stainless heat exchangers. The only thing I may not have is the fuel pump.  |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 11:23 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.