 Stock 914/6 oil tank,breather options?, K&N or similar? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| porschetub |
 Sep 8 2015, 02:50 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 4,699 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None  |
I have the PMS filler pipe and it has the 1" breather pipe lateral on the side facing the rear of the car ,anyone run a K&N or similar breather filter in this location with good results?.
If so do you need to mount a rain shield over it ?  |
   |
 
|
Posts in this topic
porschetub Stock 914/6 oil tank,breather options? Sep 8 2015, 02:50 AM
Mark Henry
I have the PMS filler pipe and it has the 1... Sep 8 2015, 06:19 AM
naro914
I personally hate breather filters, they make a ... Sep 8 2015, 06:39 AM Mark Henry I've always run a hose to the intake on the /4... Sep 8 2015, 06:50 AM Steve I run the hose into the trunk with a catch can.
... Sep 8 2015, 07:17 AM porschetub
I run the hose into the trunk with a catch can. ... Sep 8 2015, 05:02 PM MJHanna :agree:
I run the hose into the trunk with a catc... Sep 8 2015, 07:23 AM Mark Henry
:agree: [quote name='Steve' post='2234404' date='... Sep 8 2015, 09:31 AM Steve
:agree: [quote name='Steve' post='2234404' date=... Sep 8 2015, 11:14 AM SirAndy I used an old Gatorade bottle with a few holes dri... Sep 8 2015, 11:21 AM porschetub
I used an old Gatorade bottle with a few holes dr... Sep 8 2015, 05:13 PM gms I used to use an old Arizona ice tea bottle
Sep 8 2015, 05:28 PM gms then I re-purposed a washer bottle
Sep 8 2015, 05:32 PM t collins Less that 2000 miles on it and clean operation so ... Sep 8 2015, 06:41 PM porschetub
Less that 2000 miles on it and clean operation so... Sep 8 2015, 08:02 PM t collins
Less that 2000 miles on it and clean operation s... Sep 8 2015, 08:46 PM mskala I really wanted to make something small and out of... Sep 8 2015, 06:57 PM PanelBilly I had the fill neck modified with a threaded bung ... Sep 8 2015, 09:43 PM porschetub
I had the fill neck modified with a threaded bung... Sep 9 2015, 01:42 AM Maltese Falcon Tig welded aluminum catch can, breather tube to bo... Sep 9 2015, 12:25 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 08:49 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.