Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

69 Pages V  1 2 3 > »   
Reply to this topicStart new topic
> 914-6 conversion/ rusturation GT style, EFI is back on
mb911
post Nov 18 2015, 07:11 AM
Post #1


914 Guru
*****

Group: Members
Posts: 6,748
Joined: 2-January 09
From: Burlington wi
Member No.: 9,892
Region Association: Upper MidWest



Just a quick introduction. I am picking up a 74 1.8 this weekend to do a 6 conversion on. I built one about 15 years ago but then sold it and had a 964 and a 911 turbo in its absence. I have since sold everything and have not had a porsche in about 3 years.

Technology has changed since my absence and was looking for a quick list of must do's when doing a conversion..

Thanks
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Cairo94507
post Nov 18 2015, 07:17 AM
Post #2


Michael
*****

Group: Members
Posts: 9,649
Joined: 1-November 08
From: Auburn, CA
Member No.: 9,712
Region Association: Northern California



Welcome back to the madness and (IMG:style_emoticons/default/welcome.png)

There is a ton of information on this club site regarding conversions. Spend some time and all will be revealed. But, first and most importantly, we need to see pictures of the car and the usual rust spots. Welcome aboard.
User is online!Profile CardPM
Go to the top of the page
+Quote Post
mepstein
post Nov 18 2015, 07:20 AM
Post #3


914-6 GT in waiting
***************

Group: Members
Posts: 19,142
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region



(IMG:style_emoticons/default/welcome.png)
lots of great conversion threads
lots of gread vendors and members
this site rocks!
Have fun!
User is online!Profile CardPM
Go to the top of the page
+Quote Post
mb911
post Nov 18 2015, 08:16 AM
Post #4


914 Guru
*****

Group: Members
Posts: 6,748
Joined: 2-January 09
From: Burlington wi
Member No.: 9,892
Region Association: Upper MidWest



QUOTE(mepstein @ Nov 18 2015, 05:20 AM) *

(IMG:style_emoticons/default/welcome.png)
lots of great conversion threads
lots of gread vendors and members
this site rocks!
Have fun!



I actually am buying the car from a current member and will post pictures when I get it back..

Just a little more information about myself. When I did my conversion I had CNC'd a bunch of intermediate plates and also made a bunch of engine mounts along with rear sway bar mounts.. I then built 914-6 headers for my car and then a muffler and all the sudden mkexhaust.com was born. I sold M&K about 3 years ago after growing the business to a point that it was time to sell. I plan to make some more parts for the 914 market but to a much lower level then M&K was.

I am really looking forward to this experience again. My first project will be 5 bolt conversion then I will be hand making steel flares off of paterns I have. Then on to oil tanks and engine mounts and possible engine sheet metal.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Cracker
post Nov 18 2015, 08:22 AM
Post #5


Advanced Member
****

Group: Members
Posts: 2,148
Joined: 2-February 10
From: Atlanta (area)
Member No.: 11,316
Region Association: South East States



...and you're asking everyone here for advice? Is your real name "Dr. 914"? LOL

Welcome back.

Tony
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mb911
post Nov 18 2015, 08:39 AM
Post #6


914 Guru
*****

Group: Members
Posts: 6,748
Joined: 2-January 09
From: Burlington wi
Member No.: 9,892
Region Association: Upper MidWest



QUOTE(Cracker @ Nov 18 2015, 06:22 AM) *

...and you're asking everyone here for advice? Is your real name "Dr. 914"? LOL

Welcome back.

Tony



Ha ha no not hardly.. I have just been away from 914's so long I need to relearn them. The reason why I chose this car is because of all the Porsches I have owned my 6 was the most fun car I had. The turbo was wicked fast but was dangerous at the same time to a point I said enough.. The 914 is just a much more forgiving car and its the only car that should be a "targa"

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Nov 18 2015, 09:36 AM
Post #7


914-6 GT in waiting
***************

Group: Members
Posts: 19,142
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region



Is this Ben?
User is online!Profile CardPM
Go to the top of the page
+Quote Post
Mueller
post Nov 18 2015, 09:53 AM
Post #8


914 Freak!
***************

Group: Members
Posts: 17,146
Joined: 4-January 03
From: Antioch, CA
Member No.: 87
Region Association: None



QUOTE(mb911 @ Nov 18 2015, 05:11 AM) *

Just a quick introduction. I am picking up a 74 1.8 this weekend to do a 6 conversion on. I built one about 15 years ago but then sold it and had a 964 and a 911 turbo in its absence. I have since sold everything and have not had a porsche in about 3 years.

Technology has changed since my absence and was looking for a quick list of must do's when doing a conversion..

Thanks


huh?

Only thing that has changed is fuel management and you had the some of the newer stuff in the 964 and possibly the turbo depending on the year.

The cost has gone up a lot, other than that nothing else is really different.


User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mb911
post Nov 18 2015, 10:21 AM
Post #9


914 Guru
*****

Group: Members
Posts: 6,748
Joined: 2-January 09
From: Burlington wi
Member No.: 9,892
Region Association: Upper MidWest



QUOTE(mepstein @ Nov 18 2015, 07:36 AM) *

Is this Ben?



Yup
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Nov 18 2015, 10:30 AM
Post #10


914-6 GT in waiting
***************

Group: Members
Posts: 19,142
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region



QUOTE(mb911 @ Nov 18 2015, 11:21 AM) *

QUOTE(mepstein @ Nov 18 2015, 07:36 AM) *

Is this Ben?



Yup

Awesome!
User is online!Profile CardPM
Go to the top of the page
+Quote Post
porschetub
post Nov 18 2015, 11:32 AM
Post #11


Advanced Member
****

Group: Members
Posts: 4,695
Joined: 25-July 15
From: New Zealand
Member No.: 18,995
Region Association: None



QUOTE(Cairo94507 @ Nov 19 2015, 02:17 AM) *

Welcome back to the madness and (IMG:style_emoticons/default/welcome.png)

There is a ton of information on this club site regarding conversions. Spend some time and all will be revealed. But, first and most importantly, we need to see pictures of the car and the usual rust spots. Welcome aboard.


Good points,yea there is a lot info on a lot of sites but there is also lots of incorrect info out there ,my experience is the best info is on here and Pelican.
These conversions IMO have gone from being straight forward to more difficult in recent years due to original parts supply and cost,if you are doing a less than original conversion the aftermart stuff is easy enough to source but due to the limited market the parts really aren't cheap.
Judging by the amount of Subaru and V8 conversions being done many are finding -6 conversion is just too expensive,prices for good running donor motors for example have risen steeply in recent times so we are seeing more later 3.2 and 3.6 engines being used.
Buying a core motor and overhauling it can better option as you know what you have from the start.
If you have the $$ up front there are converted cars for sale for way less than the cost of doing a build,some I have recently seen can be real bargains considering the outlay of time and money by the sellers.
It is really hard to put an accurate cost on conversions unless you have a really clean car as a starting point,I feel I'am very lucky in that respect.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
EdwardBlume
post Nov 18 2015, 11:58 AM
Post #12


914 Wizard
**********

Group: Members
Posts: 12,338
Joined: 2-January 03
From: SLO
Member No.: 81
Region Association: Central California



(IMG:style_emoticons/default/welcome.png)

If I were starting another /6 conversion, I'd map out the whole thing on paper so I'm happy with the results.

Enjoy!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
whitetwinturbo
post Nov 18 2015, 12:21 PM
Post #13


Honey, does this wing make my ass look fat?
***

Group: Members
Posts: 1,391
Joined: 22-October 11
From: Newport Beach/Kalefornya/USA
Member No.: 13,704
Region Association: Southern California



(IMG:style_emoticons/default/chowtime.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dave_Darling
post Nov 18 2015, 02:11 PM
Post #14


914 Idiot
**********

Group: Members
Posts: 14,974
Joined: 9-January 03
From: Silicon Valley / Kailua-Kona
Member No.: 121
Region Association: Northern California



The basics really haven't changed. The availability of some parts has, but several vendors have stepped up and are making parts. Check 914rubber, for example.

The engines still mostly bolt up to the transmissions, though some particular flywheel/clutch combinations may need to be used. (For instance, a 3.0 or later motor needs a special "conversion flywheel" to mate with the 914's 901-based gearbox. Kennedy sells those.) Going with a 915-based box means you work out the mounting, shifting, and clutch linkage issues yourself, or pay someone like Wevo a bunch of money for a setup that's pretty well sorted.

Welcome back to the 914 fold. The li'l buggers really are hard to walk away from, aren't they?

--DD
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
PanelBilly
post Nov 18 2015, 02:18 PM
Post #15


914 Guru
*****

Group: Members
Posts: 5,788
Joined: 23-July 06
From: Kent, Wa
Member No.: 6,488
Region Association: Pacific Northwest



Burlington WA?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
KevinGieg
post Nov 18 2015, 02:55 PM
Post #16


cut, weld n' wrench
*

Group: Members
Posts: 5
Joined: 8-January 15
From: Tucson
Member No.: 18,309
Region Association: Southwest Region



Hey welcome and let us know when you fab
Those 914 six oil tanks. (IMG:style_emoticons/default/smile.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
11tenths
post Nov 18 2015, 03:31 PM
Post #17


Ve get too soon old, und too late schmart
**

Group: Members
Posts: 142
Joined: 11-October 12
From: Islip, Long Island, NY
Member No.: 15,026
Region Association: North East States



Holy Crap! One of the most revered 'blasts from the past' in the 911 world (MK Exhaust) takes a sabbatical and lands back in our 'World!

That has to be one of the most ringing endorsements for our little cars yet!

Welcome aboard Ben!

Cheers- Harry
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JmuRiz
post Nov 18 2015, 03:51 PM
Post #18


914 Guru
*****

Group: Members
Posts: 5,414
Joined: 30-December 02
From: NoVA
Member No.: 50
Region Association: MidAtlantic Region



QUOTE(mb911 @ Nov 18 2015, 06:16 AM) *

...I then built 914-6 headers for my car and then a muffler and all the sudden mkexhaust.com was born. I sold M&K about 3 years ago after growing the business to a point that it was time to sell. I plan to make some more parts for the 914 market but to a much lower level then M&K was.

I am really looking forward to this experience again. My first project will be 5 bolt conversion then I will be hand making steel flares off of patterns I have. Then on to oil tanks and engine mounts and possible engine sheet metal.

Now we're talking!!!

BTW I have an old M&K to put on my 914/6 conversion...to whom should I send it if I want to modify it? Looking to do the rally-style 3rd pipe, in the stock location, put on my 2-pipe sport style.
User is online!Profile CardPM
Go to the top of the page
+Quote Post
Mueller
post Nov 18 2015, 04:24 PM
Post #19


914 Freak!
***************

Group: Members
Posts: 17,146
Joined: 4-January 03
From: Antioch, CA
Member No.: 87
Region Association: None



QUOTE(mb911 @ Nov 18 2015, 06:16 AM) *

QUOTE(mepstein @ Nov 18 2015, 05:20 AM) *

(IMG:style_emoticons/default/welcome.png)
lots of great conversion threads
lots of gread vendors and members
this site rocks!
Have fun!



I actually am buying the car from a current member and will post pictures when I get it back..

Just a little more information about myself. When I did my conversion I had CNC'd a bunch of intermediate plates and also made a bunch of engine mounts along with rear sway bar mounts.. I then built 914-6 headers for my car and then a muffler and all the sudden mkexhaust.com was born. I sold M&K about 3 years ago after growing the business to a point that it was time to sell. I plan to make some more parts for the 914 market but to a much lower level then M&K was.

I am really looking forward to this experience again. My first project will be 5 bolt conversion then I will be hand making steel flares off of paterns I have. Then on to oil tanks and engine mounts and possible engine sheet metal.


Now kinda feel like an a-hole with my response (IMG:style_emoticons/default/wacko.gif)

Looking foward to seeing your build....especially the flares.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mb911
post Nov 18 2015, 04:36 PM
Post #20


914 Guru
*****

Group: Members
Posts: 6,748
Joined: 2-January 09
From: Burlington wi
Member No.: 9,892
Region Association: Upper MidWest



QUOTE(JmuRiz @ Nov 18 2015, 01:51 PM) *

QUOTE(mb911 @ Nov 18 2015, 06:16 AM) *

...I then built 914-6 headers for my car and then a muffler and all the sudden mkexhaust.com was born. I sold M&K about 3 years ago after growing the business to a point that it was time to sell. I plan to make some more parts for the 914 market but to a much lower level then M&K was.

I am really looking forward to this experience again. My first project will be 5 bolt conversion then I will be hand making steel flares off of patterns I have. Then on to oil tanks and engine mounts and possible engine sheet metal.

Now we're talking!!!

BTW I have an old M&K to put on my 914/6 conversion...to whom should I send it if I want to modify it? Looking to do the rally-style 3rd pipe, in the stock location, put on my 2-pipe sport style.

I can do the mods. The new owner still has me do all of his mods anyhow for the m&k stuff anyhow..
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

69 Pages V  1 2 3 > » 
Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 28th March 2024 - 09:06 AM