![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
McMark |
![]()
Post
#1
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 20,180 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None ![]() |
Anyone have this part number? Rubber piece #14.
Attached image(s) ![]() |
McMark |
![]()
Post
#2
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 20,180 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None ![]() |
And rubber piece #4.
Attached image(s) ![]() |
ejm |
![]()
Post
#3
|
I can see the light at the end of the tunnel ![]() ![]() ![]() ![]() Group: Members Posts: 2,707 Joined: 3-February 03 From: Massachusetts Member No.: 224 Region Association: None ![]() |
#4 022 133 083
#14 022 129 637B shown as NLA |
McMark |
![]()
Post
#4
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 20,180 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None ![]() |
Thanks! I thought #14 was NLA. (IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif)
|
Gint |
![]()
Post
#5
|
||
Mike Ginter ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 16,096 Joined: 26-December 02 From: Denver CO. Member No.: 20 Region Association: Rocky Mountains ![]() ![]() |
That is correct. Just 'cause you can find a part number, doesn't mean you can find the part. Good luck! |
||
Type 4 |
![]()
Post
#6
|
Member ![]() ![]() Group: Members Posts: 412 Joined: 30-September 04 From: Costa Mesa Calif. Member No.: 2,866 ![]() |
Just because its NLA dosent mean it is NLA.
There could be 97 of them in Germany. Have Stoddards do a check in germany. If it is still NLA contact Manfred and more than likely he will have it. http://www.m-freisinger.de/ |
Allan |
![]()
Post
#7
|
Teenerless Weenie ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,373 Joined: 5-July 04 From: Western Mesopotamia Member No.: 2,304 Region Association: Southern California ![]() |
My Porsche dealer sucks. I went in and checked if a part was available and they say oh sure, it'll be in in 3 days. Great, wait 3 days no part. Wait 2 weeks, no part. Third week I go in to find out what was going on. OOPS, we are sorry, that part has been NLA for years. Dumb ass.
|
SLITS |
![]()
Post
#8
|
"This Utah shit is HARSH!" ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 13,602 Joined: 22-February 04 From: SoCal Mountains ... Member No.: 1,696 Region Association: None ![]() ![]() |
It could be made using rubber hose and a "T" vacuum fitting from a local FLAPS.
I used my old cracked one and put a heavy layer of JB weld on it....it worked (and still does) |
Cap'n Krusty |
![]()
Post
#9
|
Cap'n Krusty ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California ![]() |
I believe #14 is available on the aftermarket. My memory on it is a bit vague, but I saw them somewhere. It's been unavailable from the dealer network for close to 20 years, BTW. I use the other one, suitably installed with longer hoses, elbows, and metal tubes. The Cap'n
|
rhodyguy |
![]()
Post
#10
|
Chimp Sanctuary NW. Check it out. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 22,248 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch ![]() |
is this what you need mark?
k Attached image(s) ![]() |
rhodyguy |
![]()
Post
#11
|
Chimp Sanctuary NW. Check it out. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 22,248 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch ![]() |
i can't picture where the other one is located on the plenum. this it?
k |
rhodyguy |
![]()
Post
#12
|
Chimp Sanctuary NW. Check it out. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 22,248 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch ![]() |
oops
Attached image(s) ![]() |
McMark |
![]()
Post
#13
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 20,180 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None ![]() |
It's on a 1.7. I was asking for another member so he could try to get new ones. He has the old ones but they're creating vacuum leaks (surprise, surprise).
|
rhodyguy |
![]()
Post
#14
|
Chimp Sanctuary NW. Check it out. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 22,248 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch ![]() |
mark, searching got me nowhere. found it 12 pages back. mark, i have a #37, 022 129 637 B, Stacked Vaccum Elbow. on #4 where is it located on the engine? i can't figure it out. sorry this took so long. i was having a hard time sorting the emails. i'll be emailing your friend also.
k |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 7th July 2025 - 12:58 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |