 Exhaust manifold studs?, Now what |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| catsltd |
 Jun 5 2016, 03:13 PM
Post
#1
|
|
Member  Group: Members Posts: 181 Joined: 7-June 15 From: Calgary Alberta Member No.: 18,814 Region Association: None  |
Pulling tranny.decided to change out heat exchangers while at it.
Fou;ld lots of black soot,so leaking pretty bad. The problem is when I was pulling off the passenger side 3 of the studs came out. What should I do.??.  |
   |
 
|
Posts in this topic
catsltd Exhaust manifold studs? Jun 5 2016, 03:13 PM
catsltd Should I order new Bolts.???
Old nuts are siezed ... Jun 5 2016, 03:46 PM dlee6204 If the threads in the head are not damaged then si... Jun 5 2016, 03:47 PM injunmort from the looks of things, your threads are fine. y... Jun 5 2016, 05:16 PM
catsltd
from the looks of things, your threads are fine. ... Jun 5 2016, 06:00 PM
jmitro you can get new studs at flaps, dorfman for ford ... Mar 8 2020, 07:14 PM rhodyguy You dodged 3 bullets. Congratulations. Jun 5 2016, 06:58 PM catsltd
You dodged 3 bullets. Congratulations.
I kind of... Jun 5 2016, 07:13 PM r_towle Lock tight won't hold up in the heads, and you... Jun 5 2016, 07:01 PM catsltd Help.
The exhaust leaks were massive,mainly becaus... Jun 9 2016, 09:55 AM BeatNavy I'm not aware of copper nut issues - I've ... Jun 9 2016, 10:22 AM catsltd
I'm not aware of copper nut issues - I've... Jun 9 2016, 10:49 AM worn
I'm not aware of copper nut issues - I'v... Jun 9 2016, 11:23 AM Bartlett 914
[quote name='catsltd' post='2356974' date='Jun 9 ... Mar 9 2020, 08:53 AM The Cabinetmaker Large coarse file. 16" or better. File both t... Jun 9 2016, 10:42 AM dlee6204 I use these...
http://vwparts.aircooled.net/ACN-F... Jun 9 2016, 10:44 AM McMark Some tips on exhaust.
* You don't need to fil... Jun 9 2016, 11:00 AM BeatNavy
Some tips on exhaust.
* You don't need to fi... Jun 9 2016, 11:21 AM rhodyguy Jake's method of painting the nut threads with... Jun 9 2016, 11:05 AM MarkV I had really bad luck with the copper nuts that ar... Jun 9 2016, 11:22 AM rhodyguy Marking the top of the pipes with a black sharpie ... Jun 9 2016, 11:33 AM Mark Henry If the studs are backing out the threads are strip... Jun 9 2016, 11:35 AM catsltd
If the studs are backing out the threads are stri... Jun 9 2016, 04:03 PM dlee6204
[quote name='catsltd' post='2356974' date='Jun 9 ... Jun 9 2016, 12:06 PM The Cabinetmaker I must disagree Mark. Filing them one at a time le... Jun 9 2016, 12:09 PM McMark Forgot about the annealing. YES! And quenche... Jun 9 2016, 04:51 PM rjames May have been said in a previous post but don’t ... Mar 8 2020, 08:26 PM g911 So is there a torque spec for the stud going into ... Oct 24 2021, 02:55 PM rjames
So is there a torque spec for the stud going into... Oct 24 2021, 04:36 PM 914werke If the studs are backing out, the threads are str... Oct 24 2021, 05:37 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 04:47 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.