Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Too much fuel and fouling the plugs, Checked for broken wires and obvious things
9fourteen14
post Oct 7 2016, 03:14 PM
Post #1


PORSCHE LUVA
**

Group: Members
Posts: 135
Joined: 5-July 15
From: boston
Member No.: 18,920
Region Association: North East States



I need help identifying this part.

i have a 74 2.0 teener. djet
this part is beside the distributor (that is the orange piece with the clamp)
and in front of the coil (the larger green wire.)

the green wire from this part has a brown stripe..where does it go?
where does the black wire to this part go?

I am trying to identify the part but in the long run something is awry.
not starting we have checked plugs (which are wet with fuel) we have changed them
so there is fuel, a good fuel pump.

so right now just seeing what could prevent this
from starting and found this part and need to identify it.

thanx for all your help.
Attached Image

thanx so much will update when figured out the problem. I am sure we just dislodged a wire. stay tuned. 914luva
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
9fourteen14   Too much fuel and fouling the plugs   Oct 7 2016, 03:14 PM
7TPorsh   Looks like a dual sender for oil pressure. One lin...   Oct 7 2016, 03:23 PM
SirAndy   Looks like a dual sender for oil pressure. One lin...   Oct 7 2016, 03:44 PM
rhodyguy   Oil temp sending unit.   Oct 7 2016, 03:23 PM
gms   I need help identifying this part. i have a 74 ...   Oct 7 2016, 03:24 PM
9fourteen14   I need help identifying this part. i have a 74 ...   Oct 7 2016, 03:52 PM
9fourteen14   TOO MUCH FUEL in MY 74 2.0 TEENER It is fouling...   Oct 7 2016, 05:47 PM
The Cabinetmaker   :popcorn:   Oct 7 2016, 05:56 PM
injunmort   start at the begininng, did the engine run? i wou...   Oct 7 2016, 06:01 PM
Racer   Carbs? FI ?   Oct 7 2016, 06:06 PM
Mblizzard   If FI money on MPS diaphragm broken or CHT issue.   Oct 7 2016, 06:16 PM
injunmort   i was assuming fi, he states aar is good.   Oct 7 2016, 06:26 PM
Racer   i was assuming fi, he states aar is good. lolz....   Oct 7 2016, 08:12 PM
ClayPerrine   Check the cylinder head temp sender. If it is ope...   Oct 7 2016, 09:12 PM
pbanders   Check the cylinder head temp sender. If it is op...   Oct 8 2016, 08:14 PM
ClayPerrine   [quote name='ClayPerrine' post='2408739' date='Oc...   Oct 9 2016, 05:43 AM
9fourteen14   [quote name='ClayPerrine' post='2408739' date='O...   Oct 9 2016, 03:18 PM
9fourteen14   [quote name='ClayPerrine' post='2409196' date='Oc...   Oct 15 2016, 08:14 PM
ClayPerrine   I just merged the two threads....   Oct 7 2016, 09:20 PM
McMark   CHT failure will make it so rich it won't run....   Oct 8 2016, 10:59 AM
pbanders   Two obvious answers (previously noted) so far, ope...   Oct 8 2016, 08:10 PM
injunmort   ^ yeah thats awesome, i am by no means an fi exper...   Oct 8 2016, 08:36 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 6th May 2024 - 11:25 PM