Help us rebuild a 1.7, We have no idea what we're doing, but its fun! |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Help us rebuild a 1.7, We have no idea what we're doing, but its fun! |
ericoneal |
Oct 26 2016, 02:53 PM
Post
#1
|
Member Group: Members Posts: 320 Joined: 13-August 12 From: Crestwood, KY Member No.: 14,795 Region Association: South East States |
I picked up this engine from a member of the "World" in Nashville and my son and I are going to attempt to rebuild it over the winter. We have a book, youtube, and this website and will document everything in this thread.
The first thing we had to do is get it small and light enough to get it down to the unfinished portion of my basement, so I put the boy (he's 4) to work pulling the heads off. (IMG:http://www.914world.com/bbs2/uploads_offsite/c5.staticflickr.com-14795-1477515217.1.jpg) Looks ok so far... Very hard to keep Blake from "organizing" all the nuts and bolts into a mixed pile. (IMG:http://www.914world.com/bbs2/uploads_offsite/c5.staticflickr.com-14795-1477515217.2.jpg) Success: (IMG:http://www.914world.com/bbs2/uploads_offsite/c3.staticflickr.com-14795-1477515218.3.jpg) More picture and questions to come. I have the cylinders and heads off and its ready to move, but still very heavy. Much thanks to walterolin for loaning us an engine stand, he even hand delivered it on a Sunday morning. Thanks again Walter! (IMG:http://www.914world.com/bbs2/uploads_offsite/c1.staticflickr.com-14795-1477515219.4.jpg) |
malcolm2 |
Feb 9 2018, 03:18 PM
Post
#2
|
Advanced Member Group: Members Posts: 2,738 Joined: 31-May 11 From: Nashville Member No.: 13,139 Region Association: South East States |
Cleanliness is not what is required on heads. Someone needs to check them out. Cracks etc…
2056 will need a 71 mm crank along with 96mm jugs and pistons. That crank will also require smaller rods. Folks say to make a 1.7 into a 2.0 you need to make sure the rods and crank clear webbing etc inside the engine. The cooling tin would fit 1.7 ans 2.0 jugs the OD is the same. |
Lo-Fi Version | Time is now: 27th April 2024 - 03:48 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |