 Stock front torsion bar size 17.9mm?, do I have the wrong ones,how can I check? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| porschetub |
 Dec 4 2016, 01:48 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 4,697 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None  |
Car has very firm ride in the front,I have Bilstein inserts in Boge struts but the ride is really bone jarring to the point that I have disconnected the swaybar to try and soften it up a little which it did.
Previous to unhooking the swaybar I couldn't even bounce the front of the car with my own weight,needless to say the car isn't that nice to drive (IMG:style_emoticons/default/sad.gif) . Is there an easy way to check the size,are they marked on the ends? I strongly suspect they are too larger diameter or not setup right (indexing ?) maybe,any helpful suggestions guys,thanks in advance. PS front is only lowered a small amount. |
   |
 
|
Posts in this topic
porschetub Stock front torsion bar size 17.9mm? Dec 4 2016, 01:48 PM
raynekat Might be wrong...but you likely need to pull one s... Dec 4 2016, 03:16 PM
porschetub
Might be wrong...but you likely need to pull one ... Dec 4 2016, 04:31 PM ottox914 Pull one and measure it. You can use a 17mm and 18... Dec 4 2016, 04:00 PM rhodyguy Stock lower control arm bushings? Dec 4 2016, 05:05 PM Tom_T IIRC they were originally stock only 16 mm front ... Dec 4 2016, 09:42 PM bdstone914 Stock is 15mm stamped on one end and rear is 16mm. Dec 4 2016, 10:03 PM Dave_Darling
Stock is 15mm stamped on one end and rear is 16mm... Dec 5 2016, 02:48 PM bdstone914 Torsion bars are marked on the end. Stock 914 or ... Dec 4 2016, 09:59 PM porschetub
Torsion bars are marked on the end. Stock 914 or... Dec 4 2016, 11:35 PM McMark How low is your car? You may be riding on the bum... Dec 5 2016, 08:21 AM rhodyguy Release A upper cartridge nut and see if the contr... Dec 5 2016, 09:13 AM porschetub Thanks to all, Dave,my research indicated 17.9 als... Dec 6 2016, 12:44 PM rhodyguy Not the compression of strut itself but the contro... Dec 6 2016, 01:06 PM porschetub Thanks to all, Dave,my research indicated 17.9 als... Dec 7 2016, 02:26 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th May 2024 - 01:10 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.