 Weber Float Level Settings ..., how important is this? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| SirAndy |
  Apr 29 2005, 03:13 PM
Post
#1
|
|
Resident German  Group: Admin Posts: 41,651 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California  |
ok, so i went to the weber website and looked up the float level settings for my 44 IDFs ...
10mm closed and 32.5mm open my carbs were pretty off, one side was 10mm closed and 25mm open, the other side was 8mm closed and 23mm open ... i just finished rebuilding the carbs and i did set the levels to weber specs, will that make a huge difference in how they work or not? (IMG:http://www.914world.com/bbs2/html/emoticons/idea.gif) Andy |
   |
 
|
Posts in this topic
SirAndy Weber Float Level Settings ... Apr 29 2005, 03:13 PM
jwalters http://www.914world.com/bbs2/html/e... Apr 29 2005, 03:29 PM john rogers As noted, the float level can very easily affect m... Apr 29 2005, 04:45 PM rhodyguy andy, did you ever get a definative answer on the ... Apr 30 2005, 07:34 AM SirAndy ... Apr 30 2005, 10:45 AM rhodyguy danke.
k Apr 30 2005, 11:16 AM Joe Ricard So I have mine @ 10mm Seems to work good but still... Apr 30 2005, 01:37 PM
Tom Perso FWIW, I run 135 mains, 200 A/C's, and 55 idles... Apr 30 2005, 02:25 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd May 2024 - 01:01 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.