Protect your engine lid hinges from bending or breakage, I already welded them once, not going to again! |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Protect your engine lid hinges from bending or breakage, I already welded them once, not going to again! |
oakdalecurtis |
Mar 26 2017, 04:02 AM
Post
#1
|
Oakdalecurtis Group: Members Posts: 1,325 Joined: 5-June 15 From: Oakdale, Ca Member No.: 18,802 Region Association: Central California |
Simple idea. I installed a steel cable from a screw eye in the engine bay to a screw eye on the engine lid. I put a snap on one end of the cable just in case I have to move it to work on anything in the engine bay. The cable is just long enough to allow full opening of the engine lid but no more. I can pop the engine lid from in the cabin and I no longer have to hold my hand on the lid to keep it from opening too hard and bending or breaking the hinges. Works great!
|
jeffdon |
Mar 26 2017, 09:50 AM
Post
#2
|
Senior Member Group: Members Posts: 1,094 Joined: 24-October 06 From: oakland, ca Member No.: 7,087 Region Association: None |
Simple idea. I installed a steel cable from a screw eye in the engine bay to a screw eye on the engine lid. I put a snap on one end of the cable just in case I have to move it to work on anything in the engine bay. The cable is just long enough to allow full opening of the engine lid but no more. I can pop the engine lid from in the cabin and I no longer have to hold my hand on the lid to keep it from opening too hard and bending or breaking the hinges. Works great! Been thinking of this for ages, exepct I was going to use some fairly heavy shock cord. |
oakdalecurtis |
Mar 26 2017, 11:04 AM
Post
#3
|
Oakdalecurtis Group: Members Posts: 1,325 Joined: 5-June 15 From: Oakdale, Ca Member No.: 18,802 Region Association: Central California |
Simple idea. I installed a steel cable from a screw eye in the engine bay to a screw eye on the engine lid. I put a snap on one end of the cable just in case I have to move it to work on anything in the engine bay. The cable is just long enough to allow full opening of the engine lid but no more. I can pop the engine lid from in the cabin and I no longer have to hold my hand on the lid to keep it from opening too hard and bending or breaking the hinges. Works great! Been thinking of this for ages, exepct I was going to use some fairly heavy shock cord. Yep, Blazecut Fire Suppression system, cheap fire insurance. I supported the tightly curved area with a split electrical pvc pipe curve to keep it from kinking there. Here's a pic of it installed. |
Lo-Fi Version | Time is now: 19th May 2024 - 09:54 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |