 SOT - Painting Bare Metal, Best Procedure |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| saigon71 |
 Aug 15 2018, 08:04 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,999 Joined: 1-June 09 From: Dillsburg, PA Member No.: 10,428 Region Association: MidAtlantic Region 
 |
I'm in the process of stripping a set of vending machines down to bare metal to repaint. It will be a rattle can paint job. I'm behind schedule on this install and it's a high-end account, so I want to nail this. I've already screwed up once painting these.
I consider myself a pretty decent DIY'er, but painting of any type has always been a trouble spot for me. I used 80 grit sandpaper to remove the old paint. Is it necessary to sand the bare metal with a finer grit before priming? If so, what grit should I go down to? Any other tips on the overall process would be appreciated. |
   |
 
|
  |
Replies
| Andyrew |
Aug 15 2018, 08:38 AM
Post
#2
|
|
Spooling.... Please wait Group: Members Posts: 13,376 Joined: 20-January 03 From: Riverbank, Ca Member No.: 172 Region Association: Northern California
|
Your using a rattle can? I would find some high build primer and read the can.
Your going to get a finer mist out of a can than with a guy with a 1.8 or 2.2 tip. That finer mist will not cover scratches well. If it were me I would get some 220grit D/A paper and sand it down with that. Your really not going to see 220 grit scratches and a DA does a good job of making scratches that wont transfer well to the final surface. |
|
|
|
Posts in this topic
saigon71 SOT - Painting Bare Metal Aug 15 2018, 08:04 AM
mepstein When I got my motorcycle frame and tanks painted, ... Aug 15 2018, 08:45 AM
Bruce Edge
When I got my motorcycle frame and tanks painted,... Aug 15 2018, 10:56 AM
worn
When I got my motorcycle frame and tanks painted... Aug 15 2018, 11:32 AM saigon71
When I got my motorcycle frame and tanks painted,... Aug 21 2018, 06:16 PM Perry Kiehl 80 grit scratches will show up, now or later. I l... Aug 15 2018, 12:04 PM saigon71 Thanks for the replies and advice. I am grateful ... Aug 21 2018, 06:30 PM cuddy_k That's a lot of area for a rattle can. Kudos o... Aug 21 2018, 10:20 PM Vacca Rabite Echo some of the above statements.
If you do a lot... Aug 22 2018, 08:12 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 09:40 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.