 Carb issue's |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mb911 |
 Nov 9 2018, 09:00 PM
Post
#1
|
|
914 Guru  Group: Members Posts: 6,854 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest 
 |
I have some clean (so I think) Weber 40s for my engine.. Trying to get the engine running. I can get it to fire and run 5-10 seconds and it dies out.. This is not off of the idle Circuit.. I have little experience with webers and some experience with zenith 40 tins.. Mostly efi on my 911s and 914s.. I put new gaskets and correct new jets in everything.. What would be your suggestions as first thing to look at? Accelerator pump squirters on 456 bank don't work as the bowls empty and don't refill ..
Love to borrow a set of carbs to set timing and refigure out the carbs but not sure if that is possible. Any Weber carb experts?? The new ones are looking pretty enticing... |
   |
 
|
Posts in this topic
mb911 Carb issue's Nov 9 2018, 09:00 PM
mb911 RE: Carb issue's Nov 9 2018, 09:01 PM Mark Henry Likely the float valve (grose jet) is sticking , h... Nov 10 2018, 07:01 AM
mb911
Likely the float valve (grose jet) is sticking , ... Nov 10 2018, 07:53 AM 914forme ? about the float setting tool.
you screw it into... Nov 10 2018, 08:16 AM Mark Henry
? about the float setting tool.
you screw it int... Nov 10 2018, 09:29 AM IronHillRestorations I'll 2nd that it sounds like improperly set/st... Nov 10 2018, 08:51 AM pneuhyde
I have some clean (so I think) Weber 40s for my e... Nov 10 2018, 01:01 PM sixnotfour pump em a bit ..no choke...needs more fuel when co... Nov 10 2018, 01:49 PM mb911 Ok sounds like a plan.. Gonna check levels and try... Nov 10 2018, 02:59 PM Retroracer The float level indicator tool is a good place to ... Nov 10 2018, 07:08 PM mb911
The float level indicator tool is a good place to... Nov 10 2018, 07:45 PM porschetub
The float level indicator tool is a good place to... Nov 11 2018, 12:14 AM mb911 Running better now.. Good oil pressure so very hap... Nov 15 2018, 07:42 PM mb911 https://m.facebook.com/groups/4020297998314...2496... Nov 16 2018, 05:16 AM mb911 Float levels have all been set for a base line(not... Nov 18 2018, 02:22 PM mb911 It's running well now..
https://www.facebook.... Nov 19 2018, 06:11 PM Retroracer NICE!
- Tony Nov 19 2018, 08:05 PM mb911 It was really just back to basics.. Nov 19 2018, 08:06 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 07:12 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.