 Measurement needed, Stud length used on Brads billet hubs |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jim_hoyland |
 Oct 17 2019, 04:49 PM
Post
#1
|
|
Get that VIN ?  Group: Members Posts: 9,302 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California 
 |
I bought the 5 lug Billet hubs from Brad back in the day. I’m seeking the stud length from someone that has installed or worked with them.
I’m going to add spacers and would like to order longer studs before pulling the hubs. Attached image(s) 
|
   |
 
|
  |
Replies
| yeahmag |
Nov 19 2019, 10:12 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,421 Joined: 18-April 05 From: Pasadena, CA Member No.: 3,946 Region Association: Southern California
|
Those installers Amazon sells are great. You can use a brass drift and hammer to knock the studs out.
Lisle 22800 Wheel Stud Installer https://www.amazon.com/dp/B000ETUD22/ref=cm...p_XJ5tAItCYQS3b |
|
|
|
| jim_hoyland |
Nov 20 2019, 06:28 AM
Post
#3
|
|
Get that VIN ? Group: Members Posts: 9,302 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California
|
QUOTE(yeahmag @ Nov 19 2019, 08:12 PM)  Those installers Amazon sells are great. You can use a brass drift and hammer to knock the studs out. Lisle 22800 Wheel Stud Installer https://www.amazon.com/dp/B000ETUD22/ref=cm...p_XJ5tAItCYQS3b Ordered ! Thanks for the heads up. I just need to remove one of the front hubs and measure a current stud.....any particular brand recommended ? It's a street car. Attached image(s) 
|
|
|
|
Posts in this topic
jim_hoyland Measurement needed Oct 17 2019, 04:49 PM
yeahmag This should be pretty easy to measure out. Grab th... Oct 26 2019, 08:56 PM yeahmag Grab one of these while you are at it.
https://w... Oct 26 2019, 08:58 PM jim_hoyland G
Thanks Aaron. Current studs appear to be around ... Nov 19 2019, 02:03 PM mepstein If you are going to have the hub off the car, a pr... Nov 19 2019, 02:23 PM IronHillRestorations I'd suggest using a steel lug nut with the ins... Nov 20 2019, 06:34 AM
jim_hoyland
I'd suggest using a steel lug nut with the in... Nov 20 2019, 09:24 AM
jmitro
I'd suggest using a steel lug nut with the in... Nov 21 2019, 06:53 PM 914 Ranch Alignment should not change, Jim. Nov 21 2019, 04:25 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 01:56 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.