Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Type IV Engine thoughts...., Off Topic for the vehicle, but on for the engine
malcolm2
post Nov 18 2019, 09:58 AM
Post #1


Advanced Member
****

Group: Members
Posts: 2,745
Joined: 31-May 11
From: Nashville
Member No.: 13,139
Region Association: South East States



I can't seem to settle on what I should do here. I have a good 1.8 engine, that I probably could have just attempted to get running, but it was so greasy, I figured that it did not have too much maintenance done on it over the years.... I found a bearing had moved a bit and the dowel pin gouged it. But that is all I found. Measured the bearing saddles and they are all round and even front to back.

So I figured I would crack it open and give it new life with a stock rebuild. Just a daily driver, reliable engine with torque for the bus.

I want to put it in my 72 Bus. I figured I would go with new dual carbs and a new carb cam. Considering a mega squirt option tho. So that would be a different cam. On my 914 I got the cam package from Raby years ago, so I figured Type4store for the full cam package with all the goodies.

Again, I was thinking of 96mm P/C, but also figured I would save alittle $ and just re-install the 93mm stock P/C. But the 1911 option is still on the table.

The Heads are what really have me thinking. I would like to find a local shop that might be able to check them over, but I don't think there are VW experts around here now-adays. Should I try to do some checking myself? I am cleaning them up to look for obvious cracks. What else can I do myself?

I know the Type4store has great ones, just can't make myself pull the trigger. Even heard bad stories about AMC stock (non-type4 store ones) being not so good.

Asked similar questions on TheSamba but really did not get much advice.

You guys have any thoughts?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
914Sixer
post Nov 18 2019, 01:44 PM
Post #2


914 Guru
*****

Group: Members
Posts: 8,882
Joined: 17-January 05
From: San Angelo Texas
Member No.: 3,457
Region Association: Southwest Region



I remember that Jake Raby had a perfect bus engine, not sure where you would find the details now. Parts may still be available a the Type 4 Store.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
malcolm2
post Nov 18 2019, 02:32 PM
Post #3


Advanced Member
****

Group: Members
Posts: 2,745
Joined: 31-May 11
From: Nashville
Member No.: 13,139
Region Association: South East States



QUOTE(914Sixer @ Nov 18 2019, 01:44 PM) *

I remember that Jake Raby had a perfect bus engine, not sure where you would find the details now. Parts may still be available a the Type 4 Store.


Oh they are.... I could go with their cam (super version with all the extras), their heads (camper specials). Not sure I would pull the trigger with Nickies P/C. But just the 2 above would be close to $4K, which I am OK with.

I do wonder about the rank and file on here and what they do about getting heads you can count on? I don't mind spending the $, but if there is another reliable, tried and true option for a daily driver, I would like to know about it.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 16th May 2024 - 02:07 AM