Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 Forum Rules Classified Rules!
> SOLD 914 in Bozeman Montana, 1974 1.8
Gmacmt
post Dec 28 2019, 06:27 PM
Post #1


I'm new here ...


Group: Members
Posts: 0
Joined: 28-December 19
From: Bozeman, MT
Member No.: 23,773
Region Association: None



SOLD

Found a -6 project I couldn’t pass up on, and selling a 914 I actually bought last week.

It is a 1974 with what I believe is a 1.8. Recent work to fuel injection system and fuel lines. I’ve cold started it down to 10*F and it just required a couple cranks. No smoke on startup or anything alarming and plenty of power. Pulled hard to 70 when I drove it home.

Original paint is yellow, currently sports a “painted in a shed red” 15 foot job. Would probably clean up with a cut and buff but will never be ready for the concourse without a lot of love.

Clean Montana title, but I think it’s from california and Nevada based on oral history and stickers/receipts on the car. Extremely little rust. Hell hole appears solid. Apart from some surface rust in spots the car seems clean, but I wouldn’t say completely rust free as there is some surface corrosion around places like the battery tray and inside the back seam of the rear trunk.

It’s a great candidate to be a driver, bought it from a guy in town who had it stored in a barn for years so it needs some work with the brakes at a minimum to get this thing on the road daily. Like the ad says, it’s got a stuck caliper that I’m assuming is from a corroded piston, I haven’t dug into it yet.

Body is pretty good, some dents and dings but nothing too remarkable as it sits. It looks like there may be a bit of bondo on the passenger rear fender around the wheel opening.

Here is a link to the ad I have up for it. Interior is all there, but dirty with cracked dash and windshield. I have 3k into it, and would extend that deal to forum members.

https://bozeman.craigslist.org/cto/d/bozema...7045716117.html
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies(1 - 4)
Craigers17
post Dec 29 2019, 06:45 AM
Post #2


Member
**

Group: Members
Posts: 282
Joined: 5-August 17
From: Rome, GA
Member No.: 21,317
Region Association: South East States



PM Sent.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tailwind22
post Dec 29 2019, 09:26 AM
Post #3


Member
**

Group: Members
Posts: 81
Joined: 7-November 17
From: Moses Lake, WA
Member No.: 21,583
Region Association: Pacific Northwest



When you have a chance tell us a bit about your six project.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gmacmt
post Dec 29 2019, 12:14 PM
Post #4


I'm new here ...


Group: Members
Posts: 0
Joined: 28-December 19
From: Bozeman, MT
Member No.: 23,773
Region Association: None



QUOTE(tailwind22 @ Dec 29 2019, 10:26 AM) *

When you have a chance tell us a bit about your six project.


Planning to do a build thread, but don’t want to jinx it before it’s underway. Found a forum member here with a pretty cool start on a 3.2 conversion that I’m hoping to finish.

Have a few months to put some real time in on a project before the busy season at work begins...

-g
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gmacmt
post Dec 29 2019, 12:30 PM
Post #5


I'm new here ...


Group: Members
Posts: 0
Joined: 28-December 19
From: Bozeman, MT
Member No.: 23,773
Region Association: None



Sold
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 20th October 2020 - 05:20 PM