Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> 1.8 ignition harness
Rikyrat
post Feb 13 2020, 04:46 PM
Post #1


Newbie
*

Group: Members
Posts: 37
Joined: 30-January 19
From: Phoenix
Member No.: 22,844
Region Association: None



Help, I am so confused, so what is new.

What I am puzzled about, is 9 pin relay plug on the ignition harness.
I do not remember taking it out, when I disassembled it, I don't remember it being there, everything was placed in a separate bag.

I have looked at pictures of the harnesses that Jeff Bowlsby makes and there is no place for a relay on it
But his ignition harness diagram shows it and the pinouts.
Whats up with that?
Is it needed? If so, what is the part number for the relay.

I have the Bosch relay kit, which was in place when I removed the harness.
Does that replace it?

If anybody can shed some light on this I would be ecstatic.

Thanks in advanced
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JeffBowlsby
post Feb 13 2020, 07:31 PM
Post #2


914 Wiring Harnesses
*****

Group: Members
Posts: 7,140
Joined: 7-January 03
From: San Ramon CA
Member No.: 104
Region Association: None



Hi RR,

The 1.8L ignition harness is much diff than the Djet ign harness. It does require a big square plug that connects to the dual relay. The 2wire big red cable to the battery is also in that plug. The other half of the dual relay connects to a plug-in the Ljet FI harness.

I do not show photos of every harness I make But I do make Allred’s vine bay harnesses for each model year 914. There actually is aN NOS 1.8L Ignition harness photo down in the NOS harness gallery. Factory new that dual relay connector housing was not part of the harness, it has a separate part number.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Rikyrat
post Feb 17 2020, 11:23 AM
Post #3


Newbie
*

Group: Members
Posts: 37
Joined: 30-January 19
From: Phoenix
Member No.: 22,844
Region Association: None



QUOTE(JeffBowlsby @ Feb 13 2020, 06:31 PM) *

Hi RR,

The 1.8L ignition harness is much diff than the Djet ign harness. It does require a big square plug that connects to the dual relay. The 2wire big red cable to the battery is also in that plug. The other half of the dual relay connects to a plug-in the Ljet FI harness.

I do not show photos of every harness I make But I do make Allred’s vine bay harnesses for each model year 914. There actually is aN NOS 1.8L Ignition harness photo down in the NOS harness gallery. Factory new that dual relay connector housing was not part of the harness, it has a separate part number.



Thanks Jeff
Where do I find the part number for the relay. I have checked everywhere and can't seem to find one.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JeffBowlsby
post Feb 17 2020, 01:12 PM
Post #4


914 Wiring Harnesses
*****

Group: Members
Posts: 7,140
Joined: 7-January 03
From: San Ramon CA
Member No.: 104
Region Association: None



0332514129




Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 14th July 2020 - 10:01 PM