Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Looking to put together a GB for SS Vintage speed Exhaust, Should be in the $525+ shipping Have Both Ben's and Vintage speed in stock
Mikey914
post Mar 17 2020, 01:11 AM
Post #1


The rubber man
**********

Group: Members
Posts: 12,772
Joined: 27-December 04
From: Hillsboro, OR
Member No.: 3,348
Region Association: None
We have been working with Vintage speed to try to put together a GB and we finally got numbers together. The catch, we need 25 units to make it happen. We will be bringing them over ocean freight, so the final numbers will be in shipping, but will be much cheaper than bringing in individually.

I have seen some of their work, and will have a sample prior to the shipment. I've been real happy with what I have seen so far, and think these would be a great option to the current options.

Who's in?
List is $693 without shipping

https://www.youtube.com/watch?v=kb07sMAJJ7s...eature=youtu.be


Attached thumbnail(s)
Attached Image Attached Image Attached Image Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
4 Pages V < 1 2 3 4 >  
 Reply to this topicStart new topic
Replies(40 - 59)
jim_hoyland
post Oct 5 2020, 02:52 PM
Post #41


Get that VIN ?
*****

Group: Members
Posts: 9,809
Joined: 1-May 03
From: Sunset Beach, CA
Member No.: 643
Region Association: Southern California
My Bursch is starting to rust. May be a candidate for one...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Oct 5 2020, 03:21 PM
Post #42


914-6 GT in waiting
***************

Group: Members
Posts: 19,956
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region
QUOTE(jim_hoyland @ Oct 5 2020, 04:52 PM) *

My Bursch is starting to rust. May be a candidate for one...

I have Ben’s 2.0 side exhaust in stock. 1.7 coming soon.

@jim_hoyland
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
jim_hoyland
post Oct 5 2020, 09:21 PM
Post #43


Get that VIN ?
*****

Group: Members
Posts: 9,809
Joined: 1-May 03
From: Sunset Beach, CA
Member No.: 643
Region Association: Southern California
QUOTE(mepstein @ Oct 5 2020, 02:21 PM) *

QUOTE(jim_hoyland @ Oct 5 2020, 04:52 PM) *

My Bursch is starting to rust. May be a candidate for one...

I have Ben’s 2.0 side exhaust in stock. 1.7 coming soon.

@jim_hoyland

Got it. Gonna have the bumpers for a backdating. Will shoot pics of my current set up; the valance is a FG holed one. Motor is 1.8 L-Jet with SS HES
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gint
post Oct 5 2020, 09:46 PM
Post #44


Mike Ginter
***************

Group: Admin
Posts: 16,096
Joined: 26-December 02
From: Denver CO.
Member No.: 20
Region Association: Rocky Mountains
QUOTE(mb911 @ Oct 5 2020, 01:34 PM) *
Just to clarify I make a sport muffler as well as a quiet muffler. Also note that 914 rubber now carries my mufflers as well.

Is there a sound clip available of each? And does each have an O2 bung already installed? Thanks
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mikey914
post Oct 6 2020, 12:16 AM
Post #45


The rubber man
**********

Group: Members
Posts: 12,772
Joined: 27-December 04
From: Hillsboro, OR
Member No.: 3,348
Region Association: None
We will be testing and doing sound clips for these products once we have them.
-Mark
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gint
post Oct 6 2020, 08:15 AM
Post #46


Mike Ginter
***************

Group: Admin
Posts: 16,096
Joined: 26-December 02
From: Denver CO.
Member No.: 20
Region Association: Rocky Mountains
@Mikey914 , @mb911

Guys, do both models have O2 bungs?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Oct 6 2020, 09:42 AM
Post #47


914-6 GT in waiting
***************

Group: Members
Posts: 19,956
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region
QUOTE(Gint @ Oct 6 2020, 10:15 AM) *

@Mikey914 , @mb911

Guys, do both models have O2 bungs?

They are available for $35
I have a pic of one that we just did for a customer- somewhere on my phone.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gint
post Oct 6 2020, 03:59 PM
Post #48


Mike Ginter
***************

Group: Admin
Posts: 16,096
Joined: 26-December 02
From: Denver CO.
Member No.: 20
Region Association: Rocky Mountains
I don't want to spend all the money on a beautifully welded stainless muffler and have to farm out welding an O2 bung on it. If it was included, it's a huge value add. At least to me. and a significant detail to state one way or another. Hence, the question.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Oct 6 2020, 04:27 PM
Post #49


914-6 GT in waiting
***************

Group: Members
Posts: 19,956
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region
QUOTE(Gint @ Oct 6 2020, 05:59 PM) *

I don't want to spend all the money on a beautifully welded stainless muffler and have to farm out welding an O2 bung on it. If it was included, it's a huge value add. At least to me. and a significant detail to state one way or another. Hence, the question.

Yes, If you want one, It's added when they build the muffler.
@Gint
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mb911
post Oct 6 2020, 04:27 PM
Post #50


914 Guru
*****

Group: Members
Posts: 7,600
Joined: 2-January 09
From: Burlington wi
Member No.: 9,892
Region Association: Upper MidWest
QUOTE(Gint @ Oct 6 2020, 01:59 PM) *

I don't want to spend all the money on a beautifully welded stainless muffler and have to farm out welding an O2 bung on it. If it was included, it's a huge value add. At least to me. and a significant detail to state one way or another. Hence, the question.



Very very few people request o2 bungs and if I included one with each muffler people would complain that they want a plug.. Best sampling is really the heat exchangers anyway.. I personally have sold thousands of mufflers over the years and can count on 1 hand how many want an o2 bung on the muffler.. Now when being built I can add the o2 bung to the build for $35 as Mark said.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gint
post Oct 6 2020, 04:32 PM
Post #51


Mike Ginter
***************

Group: Admin
Posts: 16,096
Joined: 26-December 02
From: Denver CO.
Member No.: 20
Region Association: Rocky Mountains
Thanks guys.

I suppose so. But I have on O2 bung on my triad and an AFR gauge in the car to help tune the carbs. And I REALLY want to go to FI at some point. Seems like more and more people are, or at least want to go this way.

I should add that either the triad is getting loud or I'm getting old. Or both. Considering a different mufflah solution. Not just flapping my upper exhaust port.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
KSCarrera
post Oct 7 2020, 09:23 AM
Post #52


Member
**

Group: Members
Posts: 330
Joined: 31-January 19
From: UK
Member No.: 22,846
Region Association: England
If anyone's interested, this is my Vintage Speed system – made to order to replicate tailpipe position of the Dansk I had previously fitted on my 2056/44IDF/SSI header combo. Came with two Lambda sensor bungs as stock, one each end. Quality and fit outstanding, far superior to the Dansk in every respect. Dansk too loud and raspy for my taste. On chassis dyno, power output identical at 130bhp on the nose, but VS much deeper, more mellow note and far less droning at speed.
Attached Image
Attached Image

Here's the Dansk for comparison (with a similar VS muffler).
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mikey914
post Oct 7 2020, 09:55 AM
Post #53


The rubber man
**********

Group: Members
Posts: 12,772
Joined: 27-December 04
From: Hillsboro, OR
Member No.: 3,348
Region Association: None
I do have some of a Ben’s and the Vintage speed ones inbound, so both will be an option soon.
Mark
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Cbarbato
post Jan 13 2021, 11:12 PM
Post #54


Newbie
*

Group: Members
Posts: 4
Joined: 31-October 14
From: Chicago, IL
Member No.: 18,077
Region Association: None
QUOTE(Mikey914 @ Oct 7 2020, 09:55 AM) *

I do have some of a Ben’s and the Vintage speed ones inbound, so both will be an option soon.
Mark


Are either 1.7l versions available yet? Specifically interested in Ben’s twin-tip sport version.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Jan 13 2021, 11:17 PM
Post #55


914-6 GT in waiting
***************

Group: Members
Posts: 19,956
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region
QUOTE(Cbarbato @ Jan 14 2021, 12:12 AM) *

QUOTE(Mikey914 @ Oct 7 2020, 09:55 AM) *

I do have some of a Ben’s and the Vintage speed ones inbound, so both will be an option soon.
Mark


Are either 1.7l versions available yet? Specifically interested in Ben’s twin-tip sport version.

Yes. Ben’s 1.7 will start shipping next week.

http://www.914world.com/bbs2/index.php?sho...=350226&hl=
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mikey914
post Jan 14 2021, 02:32 AM
Post #56


The rubber man
**********

Group: Members
Posts: 12,772
Joined: 27-December 04
From: Hillsboro, OR
Member No.: 3,348
Region Association: None
We have some of Bens and some vintage speed ones in.
I'll post up pics of both and we will be selling both.
Mark
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mikey914
post Jan 15 2021, 10:58 AM
Post #57


The rubber man
**********

Group: Members
Posts: 12,772
Joined: 27-December 04
From: Hillsboro, OR
Member No.: 3,348
Region Association: None
I now have both Ben's and the Vintage Speed Systems in stock

Here's Ben's Sport version

So if you need one right now PM me, otherwise these should be listed up next week.
Mark


Attached thumbnail(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mikey914
post Jan 15 2021, 10:58 AM
Post #58


The rubber man
**********

Group: Members
Posts: 12,772
Joined: 27-December 04
From: Hillsboro, OR
Member No.: 3,348
Region Association: None
Another of Ben's


Attached thumbnail(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mikey914
post Jan 15 2021, 11:03 AM
Post #59


The rubber man
**********

Group: Members
Posts: 12,772
Joined: 27-December 04
From: Hillsboro, OR
Member No.: 3,348
Region Association: None
Vintage speed's sport


Attached thumbnail(s)
Attached Image Attached Image Attached Image Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mikey914
post Jan 15 2021, 11:03 AM
Post #60


The rubber man
**********

Group: Members
Posts: 12,772
Joined: 27-December 04
From: Hillsboro, OR
Member No.: 3,348
Region Association: None
last one of these More to follow
PS the VS ones come with Bung plugs


Attached thumbnail(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

4 Pages V < 1 2 3 4 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 7th July 2025 - 02:41 AM
Invision Power Board v9.1.4 © 2025  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...