Looking for Mechanic in Western WA |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Looking for Mechanic in Western WA |
max72914 |
Apr 12 2020, 06:54 PM
Post
#1
|
Newbie Group: Members Posts: 43 Joined: 17-February 15 From: Bellingham, WA Member No.: 18,447 Region Association: Pacific Northwest |
Hello, I thought I would post here and see if anyone is out of work or looking to make some money by putting my motor back together and getting her running and the dual carbs dialed in. I have a ton of new parts and everything necessary to get her back to being road worthy. For someone who knows what they're doing it shouldn't take that long, but unfortunately I don't have the tools or enough knowledge to do it myself. I am up in Bellingham, but I can deliver the parts anywhere, and could trailer down the car. I put a ton of work into it before I went off to college, so it's on its way to being a badass ride, it just needs the right guy to finish it. I'm extremely motivated to get it done and if anyone on here is interested in helping or knows someone who would it would be greatly appreciated!
Thanks, Max (360) two96-9919 |
KELTY360 |
Apr 12 2020, 08:30 PM
Post
#2
|
914 Neferati Group: Members Posts: 5,031 Joined: 31-December 05 From: Pt. Townsend, WA Member No.: 5,344 Region Association: Pacific Northwest |
Try @914Werke on this forum. Rich is a good guy and a knowledgeable wrench.
|
mankowski |
Apr 12 2020, 09:29 PM
Post
#3
|
Member Group: Members Posts: 128 Joined: 7-February 10 From: Portland, Oregon Member No.: 11,335 Region Association: Pacific Northwest |
Hello, I thought I would post here and see if anyone is out of work or looking to make some money by putting my motor back together and getting her running and the dual carbs dialed in. I have a ton of new parts and everything necessary to get her back to being road worthy. For someone who knows what they're doing it shouldn't take that long, but unfortunately I don't have the tools or enough knowledge to do it myself. I am up in Bellingham, but I can deliver the parts anywhere, and could trailer down the car. I put a ton of work into it before I went off to college, so it's on its way to being a badass ride, it just needs the right guy to finish it. I'm extremely motivated to get it done and if anyone on here is interested in helping or knows someone who would it would be greatly appreciated! Thanks, Max (360) two96-9919 Max, Dick Steinkamp is a member on here and lives in Bellingham - he may be able to help or connect you. |
max72914 |
Apr 12 2020, 09:41 PM
Post
#4
|
Newbie Group: Members Posts: 43 Joined: 17-February 15 From: Bellingham, WA Member No.: 18,447 Region Association: Pacific Northwest |
Awesome, thanks for the help!
|
RRietman |
Apr 13 2020, 09:15 AM
Post
#5
|
Member Group: Members Posts: 100 Joined: 13-December 09 From: Pacific Northwest USA Member No.: 11,124 Region Association: None |
|
Bleyseng |
Apr 13 2020, 11:33 AM
Post
#6
|
Aircooled Baby! Group: Members Posts: 13,034 Joined: 27-December 02 From: Seattle, Washington (for now) Member No.: 24 Region Association: Pacific Northwest |
I have also recommend Rich at 914Werke, good guy, well kind of, but knows his stuff
|
914werke |
Apr 13 2020, 12:28 PM
Post
#7
|
"I got blisters on me fingers" Group: Members Posts: 10,066 Joined: 22-March 03 From: USofA Member No.: 453 Region Association: Pacific Northwest |
|
Don Contreras |
Apr 15 2020, 08:45 PM
Post
#8
|
Newbie Group: Members Posts: 20 Joined: 13-April 16 From: Bryn Mawr, WA Member No.: 19,898 Region Association: Pacific Northwest |
I also recommend 914werke. Rich has been very helpful to me! |
DickSteinkamp |
Apr 15 2020, 09:37 PM
Post
#9
|
Senior Member Group: Members Posts: 500 Joined: 27-February 17 From: Bellingham, WA Member No.: 20,876 Region Association: None |
Max, Dick Steinkamp is a member on here and lives in Bellingham - he may be able to help or connect you. I've got a Chevy V8 in mine and know very little about the stock motor. I'd be glad to help however, with anything non-motor. Rich ( @914Werke ) is the guy you want. There are some local shops but none with the expertise on 914s that Rich has. |
Lo-Fi Version | Time is now: 18th May 2024 - 10:22 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |