 CV Bolt Replacement, Best Practice and While I'm in There? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Nogoodwithusernames |
 Jul 2 2020, 10:07 PM
Post
#1
|
|
Member  Group: Members Posts: 236 Joined: 31-May 16 From: Nor-Cal Member No.: 20,051 Region Association: None  |
Was going to take the 914 out for a spin tonight (IMG:style_emoticons/default/driving.gif) and two streets from the house *POP* and engine free revs... Figured I broke an axle or something along those lines and sure enough drive side axle is no longer connected to the trans. Haven't dug in to find out if the bolts sheared or backed out but it needs fixing.
I'm planning on replacing all the CV bolts with the safety wire versions from 914 rubber and obviously safety wiring them. But should I locktite them? Antisieze? Neither? Figure I'd clean them and repack the grease, anything else while I'm under there? Might finally put the new shifter bushings I've had sitting around for eons... (Also how many are there? I think VW has 6 bolts per CV, same for our little NARP? *EDIT* 914 rubber says it right on their site, 16 total.) |
   |
 
|
Posts in this topic
Nogoodwithusernames CV Bolt Replacement Jul 2 2020, 10:07 PM
JamesM 4 bolts + 2 roll pins per CV joint.
Make sure you... Jul 3 2020, 02:08 AM
wndsrfr
4 bolts + 2 roll pins per CV joint.
Make sure yo... Jul 3 2020, 06:09 AM 914Sixer Run the 12.9 bolts instead of the stock ones. Use... Jul 3 2020, 06:49 AM ClayPerrine
Run the 12.9 bolts instead of the stock ones. Us... Jul 3 2020, 08:21 AM ericoneal How much torque?
Run the 12.9 bolts instead of ... Jul 3 2020, 03:20 PM 76-914
How much torque?
[quote name='ClayPerrine' post=... Jul 3 2020, 04:20 PM roblav1 If you're running the early 911 CV's with ... Jul 3 2020, 07:36 AM cuddy_k :agree:
Like many things on our cars, it all work... Jul 3 2020, 07:37 AM Bartlett 914 I too have been through this. I discovered the mai... Jul 3 2020, 07:49 AM bdstone914 Clean the holes for the CV bolts. Grease affects t... Jul 3 2020, 07:50 AM preach
Clean the holes for the CV bolts. Grease affects ... Jul 3 2020, 01:39 PM mepstein
Clean the holes for the CV bolts. Grease affects... Jul 3 2020, 01:54 PM 76-914
[quote name='preach' post='2830669' date='Jul 3 2... Jul 3 2020, 04:18 PM 914_teener
[quote name='preach' post='2830669' date='Jul 3 ... Jul 4 2020, 05:39 PM cary My only addition. If you damage the hex socket in ... Jul 3 2020, 08:04 AM Mikey914 We stock the safety wire version and the Schoor wa... Jul 3 2020, 09:49 AM IronHillRestorations As long as you use new Schnorr washers, make sure ... Jul 3 2020, 11:19 AM michael7810 I think it’s a good idea to recheck the torque a... Jul 3 2020, 11:36 AM mepstein
I think it’s a good idea to recheck the torque ... Jul 3 2020, 11:45 AM 76-914 @914teener :rotfl: I don't know if that was a... Jul 4 2020, 07:01 PM Nogoodwithusernames Alright folks, I finally got around to getting the... Sep 27 2020, 02:37 PM Mikey914 You don’t have to pull it all, but if you are th... Sep 27 2020, 05:21 PM Ansbacher When dropping my engine recently I found my CV bol... Sep 27 2020, 06:16 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 5th May 2024 - 08:19 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.